These instructions apply to the Lexus RX Mk3 (AL10) 2009-2015.
For other models, please choose your vehicle here.
If the smart key for your Lexus RX (2009–2015) — the AL10 — has gone dead and the car won’t detect it, you’re not stranded. The RX can still be unlocked and started using the key itself, because the fob has a hidden mechanical blade and a transponder that works at close range without battery power. Here’s how to get in and get going.
Why a Dead Fob Still Works
A flat coin cell only stops the remote radio functions — walk-up unlocking and the proximity detection that lets you just press START. The key still contains a passive transponder chip the car can read when the fob is held right against the start button, and a metal blade for the door lock. Both work with a completely dead battery.
Getting Into the Car
- Slide out the mechanical key — push and hold the release catch on the fob and pull the blade free.
- Unlock the driver’s door with the blade (the lock may be behind a small cover on the handle).
- Opening the door with the blade may set off the alarm — it stops once you start the car with the key.
Starting With a Dead Key
- Press the brake pedal (foot on the brake, as for a normal start).
- Touch the fob directly against the POWER (START/STOP) button — hold it flat against the button face.
- Press the POWER button with the fob still touching it. The car reads the transponder at close range and starts.
- Confirm the READY light (450h) or that the engine starts (350/270), then drive.
If It Still Won’t Start
- Hold the fob flat against the button — the logo side usually reads best; try the other face if the first doesn’t take.
- Press the brake firmly — without it the button only changes ignition mode rather than starting the car.
- Replace the coin cell as soon as you can — the RX standard fob takes a CR1632 (not the common CR2032). See our key fob battery guide.
- Still nothing? A flat 12 V car battery (not the fob) can also stop the car waking — check that separately.
Frequently Asked Questions
How do I start a Lexus RX with a dead key fob?
Press the brake and hold the fob flat against the POWER (START/STOP) button as you press it. The car reads the key’s transponder at close range and starts without the fob battery.
How do I unlock the RX if the fob is dead?
Pull the mechanical blade out of the fob (press the release catch) and use it in the driver’s door lock. The alarm may sound briefly and stops when you start the car with the key.
What battery does the RX key take?
The standard smart key uses a CR1632 coin cell — a thinner cell than the CR2032 most cars use. Fit the correct type and the walk-up functions return.
Is the car reading the key or the battery?
It reads the key’s passive transponder chip, which needs no battery — that’s why holding a completely dead fob against the button still starts the car.
If a key or immobilizer warning stored a code, decode it on autodtcs.com.
Independent guide — not affiliated with Lexus. Always follow your official service manual and safety precautions. Read our full disclaimer.