• Home
  • Tire Pressure Calculator
  • Check DTC Codes
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact Us
  • Tools
  • Home
  • Tire Pressure Calculator
  • Check DTC Codes
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact Us
  • Tools
Home/Lexus/IS/Mk3 (XE30) 2013-2020/Reset the Service Indicator

Reset the Service Indicator

These instructions apply to the Lexus IS Mk3 (XE30) 2013-2020. For other models, please choose your vehicle here.

Last updated: June 8, 2026

When the maintenance / service reminder shows on your Lexus IS (2013–2020) — the IS 300h hybrid or the petrol IS 200t/300 — you can clear it yourself after a service. Most cars use the Remote Touch dash menu; cars with the simpler trip display use a button sequence. Here are both.

Before You Start

Reset only after the service is done. Switch the ignition on, not READY (don’t press the brake when you press START).

Method 1 — Cars With the Multimedia Display

  1. Switch the ignition on (not READY).
  2. Open MENU > Setup > Vehicle > Maintenance (or ‘Scheduled Maintenance’).
  3. Select the engine oil / maintenance item and confirm the reset.

Method 2 — Cars With a Trip Display

  1. Switch the ignition on (don’t press the brake) and press the trip recorder button to select ‘TRIP A’.
  2. Switch the ignition off.
  3. Press and hold the trip recorder button, and while holding it, press START twice to switch the ignition on.
  4. Keep the button held until the display shows ‘000000’ — the reminder is reset.

If the Reminder Won’t Clear

  • Hold the trip button the whole time until ‘000000’ shows.
  • Stay in ignition-on, not READY — don’t press the brake.
  • A separate warning light? A fault stores a code — look it up on autodtcs.com.

Frequently Asked Questions

How do I reset the maintenance light on a Lexus IS?

On multimedia cars use MENU > Setup > Vehicle > Maintenance; on trip-display cars hold the trip button while switching on until ‘000000’ shows.

Do I need a diagnostic tool?

No — both methods are owner-doable.

Which method applies to my car?

If your IS has the Remote Touch multimedia screen, use the menu; if it has the simpler trip display, use the button sequence.

The light came back — why?

The reset probably didn’t complete; repeat it carefully.

If another warning light appeared with the service message, our sister site autodtcs.com can help you decode it.

Disclaimer: The information on this page is provided for general guidance only. Always follow your official service manual and safety precautions when working on your vehicle. We are not responsible for errors, omissions, or any damage resulting from the use of this information.

This website is an independent resource and is not affiliated with, endorsed by, or sponsored by Lexus. All trademarks and brand names belong to their respective owners.

Was this helpful?

Yes  No
Related Articles
  • Release the Shift Lock (Stuck in Park)
  • Reset the Tyre Pressure Monitor (TPMS)
  • Replace the Key Fob Battery
  • Disconnect and Reconnect the Battery

Didn't find your answer? Contact Us

Mk3 (XE30) 2013-2020
  • Reset the Service Indicator
  • Disconnect and Reconnect the Battery
  • Replace the Key Fob Battery
  • Reset the Tyre Pressure Monitor (TPMS)
  • Release the Shift Lock (Stuck in Park)

Service Reset

Step-by-step reset and maintenance guides for all major car brands. Independent resource – not affiliated with any car manufacturer. All trademarks and logos are the property of their respective owners and are used for identification purposes only.

© 2026 ServiceReset.net. All rights reserved.

NAVIGATION
  • Home
  • About
  • Tire Pressure Calculator
  • Blog
  • FAQ
  • Request a Guide
  • Contact
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
SOCIAL
  • YouTube