Reset the Power Windows

Last updated: June 9, 2026

If a window on your DS 4 (2011–2018) has lost its one-touch up/down — usually after a flat or disconnected battery, or a fuse change — you can re-initialise it yourself in under a minute. No tools.

Why It Happens

Each window’s control module learns its fully-up and fully-down stops. Cut the power and that memory is lost, so one-touch and anti-pinch stop working until you re-teach the limits.

Re-initialising a Window

Do this with the door closed and the ignition on, one window at a time:

1. Pull the switch up and hold it until the window is fully closed; keep holding for 1–2 seconds after it stops.
2. Press the switch down and hold until the window is fully open; keep holding briefly after it stops.
3. Pull up again to fully close and hold briefly — one-touch and anti-pinch are now relearned.
4. Repeat for each affected window.

If It Still Won’t One-Touch

• Hold the switch past each limit — letting go early aborts the learn.
• Do it with the door shut so the glass reaches its true closed position.
• A faulty regulator or switch can block the learn — any stored fault can be looked up on autodtcs.com.

Frequently Asked Questions

Why did my DS 4’s window stop going up with one touch?

The window module lost its learned limits, usually after a battery disconnection or fuse change.

How do I reset the windows?

Hold the switch fully up (and a moment more), then fully down, then up again, one window at a time.

Do I need any tools?

No — it’s done entirely with the window switch.

It still won’t work — now what?

Repeat carefully holding the limits; if it still fails, a regulator or switch fault may be stored — check autodtcs.com.

If the windows dropped out after a battery change, see our DS 4 battery disconnect/reconnect guide.