• Home
  • Tire Pressure Calculator
  • Check DTC Codes
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact Us
  • Tools
  • Home
  • Tire Pressure Calculator
  • Check DTC Codes
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact Us
  • Tools
Home/Smart/Forfour/Mk2 (W453) 2014-2021/Replace the Key Fob Battery

Replace the Key Fob Battery

These instructions apply to the Smart Forfour Mk2 (W453) 2014-2021. For other models, please choose your vehicle here.

Last updated: June 10, 2026

If the key fob on your Smart Forfour (W453, 2014–2021) has gone weak or the locking has become intermittent, the coin cell inside is almost certainly flat. It’s a quick swap.

Battery First — What You Need

  • A CR2032 coin cell (check the marking on the old one when you open the fob).
  • A small screwdriver and a coin.

Replacing the Cell

  1. Remove the screw on the back of the fob.
  2. Use a coin to twist off the button-cell cover.
  3. Remove the cell casing and lift out the old cell.
  4. Fit the new cell, observing the correct polarity.
  5. Reassemble in reverse order and check the remote locks and unlocks the car.

Lost Key or Adding a Spare

A cell swap keeps the existing coding. A lost or broken key can only be ordered and programmed by a smart/Mercedes dealer — there’s no owner programming sequence.

If a Fresh Cell Doesn’t Help

  • Check the polarity — an upside-down cell won’t work.
  • Hold the fob close to the car while the receiver re-syncs.
  • Still intermittent? A receiver fault can store a code — look it up on autodtcs.com.

Frequently Asked Questions

What battery does the Smart Forfour W453 key use?

A single coin cell, typically a CR2032 — confirm against the old one.

Do I need to reprogram the key after the swap?

No — the coding is retained for a battery change.

Can I program a new key myself?

No — a replacement must be ordered and coded by a dealer.

How do I open the fob?

Remove the screw, then use a coin to twist off the button-cell cover.

If the fob stopped working after a battery disconnection, see our Smart Forfour battery disconnect/reconnect guide.

Disclaimer: The information on this page is provided for general guidance only. Always follow your official service manual and safety precautions when working on your vehicle. We are not responsible for errors, omissions, or any damage resulting from the use of this information.

This website is an independent resource and is not affiliated with, endorsed by, or sponsored by Smart. All trademarks and brand names belong to their respective owners.

Was this helpful?

Yes  No
Related Articles
  • Start the Car With a Dead Key Fob Battery
  • Reset a Frozen Infotainment Screen
  • Reset the Tyre Pressure Monitor (TPMS)
  • Disable the Start/Stop System
  • Disconnect and Reconnect the Battery
  • Reset the Service Indicator

Didn't find your answer? Contact Us

Mk2 (W453) 2014-2021
  • Replace the Key Fob Battery
  • Reset the Service Indicator
  • Disconnect and Reconnect the Battery
  • Disable the Start/Stop System
  • Reset the Tyre Pressure Monitor (TPMS)
  • Reset a Frozen Infotainment Screen
  • Start the Car With a Dead Key Fob Battery

Service Reset

Step-by-step reset and maintenance guides for all major car brands. Independent resource – not affiliated with any car manufacturer. All trademarks and logos are the property of their respective owners and are used for identification purposes only.

© 2026 ServiceReset.net. All rights reserved.

NAVIGATION
  • Home
  • About
  • Tire Pressure Calculator
  • Blog
  • FAQ
  • Request a Guide
  • Contact
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
SOCIAL
  • YouTube