These instructions apply to the Chevrolet Aveo Mk2 (T300) 2011-2015. For other models, please choose your vehicle here.
Last updated:
After an oil change on your Chevrolet Aveo (T300, 2011–2015), the oil-life service indicator needs resetting so the countdown starts again. You can do it yourself from the dashboard menu — no tool needed.
Before You Start
- The indicator refers to the oil change — only reset it after the oil has actually been changed.
Resetting the Service Indicator
- Turn the ignition on but do not start the engine.
- Press ‘MENU’ and scroll until ‘remaining oil life’ appears.
- Press and hold the ‘SET/CLR’ button for about 3 seconds.
- An audible signal sounds and a confirmation message appears — release the button. The interval is reset.
If the Reset Doesn’t Take
- Don’t start the engine — ignition on only.
- Hold SET/CLR the full 3 seconds until it confirms.
- A service light that won’t clear can store a code — look it up on autodtcs.com.
Frequently Asked Questions
How do I reset the oil life light on a Chevrolet Aveo?
Ignition on (engine off), MENU > remaining oil life, then hold SET/CLR for 3 seconds.
Do I need a tool?
No — it’s done from the dashboard menu.
Why won’t it reset?
Usually the engine was started, or SET/CLR wasn’t held long enough.
Should I reset before or after the oil change?
After — the indicator monitors oil life and protects the engine.
If a service-related warning stays on, decode the code on autodtcs.com.
Disclaimer: The information on this page is provided for general guidance only. Always follow your official service manual and safety precautions when working on your vehicle. We are not responsible for errors, omissions, or any damage resulting from the use of this information.
This website is an independent resource and is not affiliated with, endorsed by, or sponsored by Chevrolet. All trademarks and brand names belong to their respective owners.