• Home
  • Guides
  • Tire Pressure Calculator
  • Check DTC Codes
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact Us
  • Tools
  • Home
  • Guides
  • Tire Pressure Calculator
  • Check DTC Codes
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact Us
  • Tools
Home/Isuzu/MU-X/Mk1 2013-2020/Disconnect and Reconnect the Battery

Disconnect and Reconnect the Battery

These instructions apply to the Isuzu MU-X Mk1 2013-2020. For other models, please choose your vehicle here.

Last updated: June 12, 2026

Disconnecting the 12 V battery on your Isuzu MU-X (2013–2020) — for a new battery, winter storage, or work near the airbags — is a straightforward job. The battery is in the engine compartment.

Find the Battery First

The 12 V battery is in the engine compartment, in the usual front corner. Note your radio security code and preset stations before you start.

Disconnecting Safely

  1. Turn the ignition off and make sure all electrical consumers are off.
  2. Disconnect the negative (−) terminal first, then the positive.
  3. Working near airbags or seat-belt pretensioners? Wait a few minutes after disconnecting.

Reconnecting

Reconnect positive first, then negative. Afterwards:

  • Re-enter the clock and radio presets.
  • If a window loses one-touch, hold the switch at the limit to relearn it.
  • Warning lights settle after a short drive.

If Something Isn’t Right Afterwards

  • Warning lights often clear after a short drive.
  • A persistent light stores a code — look it up on autodtcs.com.
  • Fit a like-for-like battery — the MU-X diesel needs a strong starter battery.

Frequently Asked Questions

Where is the battery on an Isuzu MU-X?

In the engine compartment, in the usual front corner.

Which terminal first?

Negative (−) off first, reconnect it last.

Will I lose my radio code?

Note it first — you’ll re-enter the clock and presets after reconnecting.

How long should I wait near the airbags?

Give it a few minutes after disconnecting before working on airbags or pretensioners.

If a warning light stays on after reconnecting, look up the code on autodtcs.com.

Disclaimer: The information on this page is provided for general guidance only. Always follow your official service manual and safety precautions when working on your vehicle. We are not responsible for errors, omissions, or any damage resulting from the use of this information.

This website is an independent resource and is not affiliated with, endorsed by, or sponsored by Isuzu. All trademarks and brand names belong to their respective owners.

Was this helpful?

Yes  No
Related Articles
  • Release the Transmission from Park (Emergency)
  • Replace the Key Fob Battery
  • Reset the Service Indicator

Didn't find your answer? Contact Us

Mk1 2013-2020
  • Disconnect and Reconnect the Battery
  • Reset the Service Indicator
  • Replace the Key Fob Battery
  • Release the Transmission from Park (Emergency)

Service Reset

Step-by-step reset and maintenance guides for all major car brands. Independent resource – not affiliated with any car manufacturer. All trademarks and logos are the property of their respective owners and are used for identification purposes only.

© 2026 ServiceReset.net. All rights reserved.

POPULAR BRANDS
Toyota · Volkswagen · BMW · Ford · Audi · Mercedes · Nissan · Peugeot · Vauxhall · Kia
NAVIGATION
  • Home
  • Guides
  • Tools
  • Tire Pressure Calculator
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
SOCIAL
  • YouTube