These instructions apply to the DR DR5 (2020-2023). For other models, please choose your vehicle here.
Last updated:
If the key fob on your DR 5 (DR5, 2020–2023) has gone weak or the locking has become intermittent, the coin cell inside is almost certainly flat. It’s a quick swap with a CR2032.
Battery First — What You Need
- A CR2032 coin cell.
- A small flat screwdriver.
Replacing the Cell
- Pull out the mechanical key (if fitted), then ease the fob case apart with a screwdriver.
- Remove the old cell (don’t touch the terminals).
- Fit a new CR2032, observing the correct polarity.
- Close the case and check the remote locks and unlocks the car.
Lost Key or Adding a Spare
A cell swap keeps the existing coding. A lost or broken key can only be ordered and programmed by a dealer — there’s no owner sequence.
If a Fresh Cell Doesn’t Help
- Check the polarity — an upside-down cell won’t work.
- Use the mechanical key blade to unlock the door in the meantime.
- Still intermittent? A receiver fault can store a code — look it up on autodtcs.com.
Frequently Asked Questions
What battery does the DR 5 key use?
A single CR2032 coin cell.
Do I need to reprogram the key after the swap?
No — the coding is retained for a battery change.
Can I program a new key myself?
No — a replacement must be ordered and coded by a dealer.
The fob is dead — can I still get in?
Use the mechanical key blade to unlock the door if your fob has one.
If the fob stopped working after a battery issue, decode any stored code on autodtcs.com.
Disclaimer: The information on this page is provided for general guidance only. Always follow your official service manual and safety precautions when working on your vehicle. We are not responsible for errors, omissions, or any damage resulting from the use of this information.
This website is an independent resource and is not affiliated with, endorsed by, or sponsored by DR. All trademarks and brand names belong to their respective owners.