These instructions apply to the Nissan Pulsar C13, C12, B17 (2014 - 2018). For other models, please choose your vehicle here.
If the battery has been disconnected or the window memory has been lost, the electric windows in the Nissan Pulsar may need to be re-initialized. This process restores proper one-touch up and down operation.
Initialization Procedure – Driver’s Side
Switch the ignition ON.
Make sure all doors are closed.
Press and hold the window switch to fully open the driver’s window.
Release the switch once the window is fully open.
Pull and hold the switch to fully close the window.
Keep the switch pressed for 2 additional seconds after closing.
Release the switch and test for correct operation.
Initialization Procedure – Passenger Side
Repeat the same steps for the passenger-side window.
⚠️ Tip: If the windows still don’t respond properly, repeat the procedure or check the vehicle battery, as weak voltage may interfere with calibration.
Disclaimer: The information on this page is provided for general guidance only. Always follow your official service manual and safety precautions when working on your vehicle. We are not responsible for errors, omissions, or any damage resulting from the use of this information.
This website is an independent resource and is not affiliated with, endorsed by, or sponsored by Nissan. All trademarks and brand names belong to their respective owners.