Service ResetService Reset
  • Home
  • Guides
  • Diagnostics
  • Tools
    • Tire Pressure Calculator
    • Request a Guide
    • Wheel Offset Calculator
    • Tire Size Comparison
    • Tire Pressure Converter
    • Torque Converter
    • Coolant & Antifreeze Mix
  • Blog
  • About
  • FAQ
  • Contact Us
  • Home
  • Guides
  • Diagnostics
  • Tools
    • Tire Pressure Calculator
    • Request a Guide
    • Wheel Offset Calculator
    • Tire Size Comparison
    • Tire Pressure Converter
    • Torque Converter
    • Coolant & Antifreeze Mix
  • Blog
  • About
  • FAQ
  • Contact Us
Home/Chevrolet/Silverado 1500/Mk4 (T1XX) 2019-Present/Disconnect and Reconnect the Battery

Disconnect and Reconnect the Battery

Reviewed by the Service Reset editor · Updated October 11, 2026 · How we verify

These instructions apply to the Chevrolet Silverado 1500 Mk4 (T1XX) 2019-Present.
For other models, please choose your vehicle here.

Before any electrical work on a 2019–Present Chevrolet Silverado 1500 you disconnect the 12 V battery. Doing it in the right order keeps a wrench from shorting the live post to the body and protects the truck’s electronics; reconnecting in the right order avoids a surge. This is the US-market procedure, the same as on the GMC Sierra.

  1. Park, ignition off, key out, and wait a couple of minutes with the doors closed so the modules sleep. Put on eye protection. Do not disconnect with the ignition on.
  2. Note whether your truck has Stop/Start (2.7L turbo, 5.3L L84, 6.2L, or 3.0L diesel). Those trucks use an AGM (Absorbed Glass Mat) battery — replace only with AGM, as a standard battery shortens its life.
  3. Open the hood. The 12 V battery is in the engine bay on the driver’s side (diesels add a second battery at the passenger-side rear).
  4. On Stop/Start trucks the negative cable bolts to a battery sensor stud rather than the post — loosen that nut, lift the cable off the stud, and insulate it.
  5. Do your work. With the battery off, the clock, radio presets and some driver settings will need re-setting afterward.
  6. Reconnect the negative last: fit the positive first if it was removed, then the negative cable to its post or sensor stud. Use the original nut and a hand tool only — no impact wrench, and no grease or paint on the stud.
  7. Switch on, check for warning lights, and reset the clock and presets.

FAQ

Which terminal comes off first?

Always negative off first and negative on last — it stops a slipped wrench bridging the live positive to the grounded body.

Will I lose my settings?

Expect to re-set the clock and radio presets; most driver personalization returns on its own.

Do I need a memory saver?

Optional. A memory saver in the accessory socket keeps presets alive, but it leaves the system live — so keep tools clear of the terminals.

Anything special after reconnecting?

Just the clock and presets. If a warning light stays on, check the stored code before driving far.

The Silverado 1500 shares its platform and running gear with the GMC Sierra 1500, so this procedure is identical on both — see our GMC Sierra 1500 guides.

If your truck stores a fault code with the warning light, look it up on autodtcs.com.

Independent guide — not affiliated with Chevrolet. Always follow your official service manual and safety precautions. Read our full disclaimer.

Related Articles
  • Specifications, Dimensions and Weights
  • Jump-Start the Truck
  • Reset the Tire Pressure Monitor (TPMS)
  • Reset the Oil Life

On This Page: [hide]

FAQ

Which terminal comes off first?

Will I lose my settings?

Do I need a memory saver?

Anything special after reconnecting?

Service Reset

Independent step-by-step car reset & maintenance guides – not affiliated with any manufacturer. All trademarks belong to their respective owners.

© 2026 ServiceReset.net. All rights reserved.

POPULAR BRANDS
Toyota · Volkswagen · BMW · Ford · Audi · Mercedes · Nissan · Kia
EXPLORE
  • Guides
  • Blog
  • About
  • Contact
TOOLS
  • Dashboard Warning Lights
  • Tire Pressure Calculator
  • Tools
  • FAQ
  • Request a Guide
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
  • YouTube
  • Pinterest