These instructions apply to the Daewoo Lacetti (J200) 2003-2008. For other models, please choose your vehicle here.
Last updated:
After an oil change on your Daewoo Lacetti (J200, 2003–2008), the service indicator needs resetting so the reminder clears. You can do it yourself with the accelerator-pedal method — no tool needed.
Before You Start
- Only reset after the oil has actually been changed.
Resetting the Service Indicator
- Turn the ignition on but do not start the engine.
- Within 5 seconds, press and release the accelerator pedal 3 times.
- Turn the ignition off — the service indicator is reset.
If the Reset Doesn’t Take
- Don’t start the engine — ignition on only.
- Keep within 5 seconds for the three pedal presses.
- A service light that won’t clear can store a code — look it up on autodtcs.com.
Frequently Asked Questions
How do I reset the service light on a Daewoo Lacetti?
Ignition on (engine off), then press the accelerator 3 times within 5 seconds and switch off.
Do I need a tool?
No — it’s the pedal sequence from the driver’s seat.
Why won’t it reset?
Usually the engine was started, or the three presses weren’t within 5 seconds.
Should I reset before or after the oil change?
After — the indicator counts down to the next service.
If a service-related warning stays on, decode the code on autodtcs.com.
Disclaimer: The information on this page is provided for general guidance only. Always follow your official service manual and safety precautions when working on your vehicle. We are not responsible for errors, omissions, or any damage resulting from the use of this information.
This website is an independent resource and is not affiliated with, endorsed by, or sponsored by Daewoo. All trademarks and brand names belong to their respective owners.