• Home
  • Tire Pressure Calculator
  • Check DTC Codes
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact Us
  • Tools
  • Home
  • Tire Pressure Calculator
  • Check DTC Codes
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact Us
  • Tools
Home/DS/4/Mk2 2021-Present/Reset the Tyre Pressure Monitor (TPMS)

Reset the Tyre Pressure Monitor (TPMS)

These instructions apply to the DS 4 Mk2 2021-Present. For other models, please choose your vehicle here.

Last updated: June 9, 2026

If the tyre-pressure warning has come on in your DS 4 (2021–present) after you’ve adjusted the pressures or changed a wheel, you reset it from the touchscreen. The DS 4 uses sensors in the wheels, so it re-initialises the stored pressures when you confirm in the menu.

When to Reset

  • After checking or adjusting the tyre pressures.
  • After changing wheels or tyres, or fitting winter wheels.

Resetting the System

  1. Park level and set all four tyres to the correct cold pressures (placard in the driver’s door shut).
  2. Switch the ignition on with the car stationary.
  3. On the touchscreen, open ‘Parameters’ > ‘Vehicle’ > ‘Security’.
  4. Select ‘Configuration of the tyre pressure’ > ‘Reinitialisation’.
  5. A confirmation message appears — the system is reset.

If the Warning Stays On

  • Recheck every tyre — one below spec keeps the warning on.
  • Confirm the reinitialisation in the menu — backing out leaves it unchanged.
  • Drive a few minutes so the sensors report.
  • Still showing with correct pressures? A sensor may have a flat battery — look up the code on autodtcs.com.

Frequently Asked Questions

How do I reset the tyre pressure light on a DS 4?

Set the pressures, then on the touchscreen go Parameters > Vehicle > Security > Configuration of the tyre pressure > Reinitialisation.

Does the DS 4 have sensors in the wheels?

Yes — it’s a direct system, so a sensor with a flat battery can keep the warning on.

Why won’t the warning clear?

Usually a tyre still below spec, or the reinitialisation wasn’t confirmed.

Do I need a tool?

No for a normal reset; a tool is only needed if a sensor is replaced.

If the warning came on with other lights, decode the code on autodtcs.com.

Disclaimer: The information on this page is provided for general guidance only. Always follow your official service manual and safety precautions when working on your vehicle. We are not responsible for errors, omissions, or any damage resulting from the use of this information.

This website is an independent resource and is not affiliated with, endorsed by, or sponsored by DS. All trademarks and brand names belong to their respective owners.

Tyre tools: Changed tyre size or just adjusting pressures? Use our free non-stock tyre pressure calculator, bar/PSI/kPa converter and tyre size comparison tool.

Was this helpful?

Yes  No
Related Articles
  • Reset the Power Windows
  • Replace the Key Fob Battery
  • Reset the Service Indicator

Didn't find your answer? Contact Us

Mk2 2021-Present
  • Reset the Tyre Pressure Monitor (TPMS)
  • Reset the Service Indicator
  • Replace the Key Fob Battery
  • Reset the Power Windows

Service Reset

Step-by-step reset and maintenance guides for all major car brands. Independent resource – not affiliated with any car manufacturer. All trademarks and logos are the property of their respective owners and are used for identification purposes only.

© 2026 ServiceReset.net. All rights reserved.

NAVIGATION
  • Home
  • About
  • Tire Pressure Calculator
  • Blog
  • FAQ
  • Request a Guide
  • Contact
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
SOCIAL
  • YouTube