These instructions apply to the Kia Venga Mk1 (YN) 2010-2019.
For other models, please choose your vehicle here.
The Kia Venga (YN, 2010–2019) with Stop & Start (ISG — Idle Stop & Go) shuts the engine off at a standstill to save fuel and restarts it when you pull away. If you’d rather it stayed running — in heavy traffic, when manoeuvring, or before working under the bonnet — you can switch it off with one button.
Where the Button Is
The ISG OFF button is in the switch panel low on the dashboard, to the right of the steering column.
How to Turn ISG Off
- With the engine running, press the ISG OFF button once.
- The ISG OFF warning light comes on and the display confirms the system is off.
- The engine now stays running at a standstill until you switch ISG back on.
How to Turn ISG Back On
Press the ISG OFF button again, or simply restart the car — ISG defaults back on every time you switch the ignition off and on, so it is never left disabled permanently.
Frequently Asked Questions
Does ISG stay off after I restart the car?
No. Stop & Start returns to its default ON state each time you start the car, so you press ISG OFF again if you want it off for that trip.
Why won’t my engine stop at the lights even with ISG on?
ISG only stops the engine once conditions are met — engine warm, battery well charged, climate demand low, and the car fully stopped with the seat belt fastened and the door closed. Opening the driver’s door or unclipping the belt also cancels an auto-stop. After a battery change it may take a few drive cycles to work again.
Is it bad to switch ISG off?
No. The button simply keeps the engine running; it doesn’t affect anything else. Many owners turn it off in stop-go traffic and back on for open-road driving.
If a Stop & Start fault light appears, look the code up on autodtcs.com.
Independent guide — not affiliated with Kia. Always follow your official service manual and safety precautions. Read our full disclaimer.