These instructions apply to the Lexus LC Mk1 (Z1) 2018-Present. For other models, please choose your vehicle here.
Last updated:
When the maintenance / service reminder appears on your Lexus LC (2018–present) — the LC 500 V8 or the LC 500h hybrid — you can clear it yourself after a service using the dashboard. No dealer needed.
Before You Start
Reset only after the service is done. Switch the ignition on, not READY (don’t press the brake when you press START).
Resetting the Reminder
- Switch the ignition on (not READY).
- Using the steering-wheel controls, open the multi-information display Settings > Vehicle > Maintenance (or ‘Scheduled Maintenance’).
- Select the engine oil / maintenance item and confirm the reset.
If the Reminder Won’t Clear
- Stay in ignition-on, not READY — don’t press the brake.
- Confirm the reset when prompted.
- A separate warning light? A fault stores a code — look it up on autodtcs.com.
Frequently Asked Questions
How do I reset the maintenance light on a Lexus LC?
Switch on (not READY), open Settings > Vehicle > Maintenance in the display and confirm the reset.
Do I need a diagnostic tool?
No — it’s owner-doable.
Does the LC 500h reset differently from the V8 LC 500?
No — both use the same maintenance menu.
It cleared but came back — why?
The reset probably wasn’t confirmed; repeat it.
If another warning light appeared with the service message, our sister site autodtcs.com can help you decode it.
Disclaimer: The information on this page is provided for general guidance only. Always follow your official service manual and safety precautions when working on your vehicle. We are not responsible for errors, omissions, or any damage resulting from the use of this information.
This website is an independent resource and is not affiliated with, endorsed by, or sponsored by Lexus. All trademarks and brand names belong to their respective owners.