Service ResetService Reset
  • Home
  • Guides
  • Tools
    • Tire Pressure Calculator
    • Check DTC Codes
    • Request a Guide
  • Blog
  • About
  • FAQ
  • Contact Us
  • Home
  • Guides
  • Tools
    • Tire Pressure Calculator
    • Check DTC Codes
    • Request a Guide
  • Blog
  • About
  • FAQ
  • Contact Us
Home/Fiat/Talento/2016-2021/Reset the Tyre Pressure Warning

Reset the Tyre Pressure Warning

Reviewed by the Service Reset editor · Updated September 25, 2026 · How we verify

These instructions apply to the Fiat Talento 2016-2021.
For other models, please choose your vehicle here.

The Fiat Talento (2016–2021) watches your tyre pressures and warns when one drops. After you’ve adjusted the pressures or changed a wheel or tyre, the system needs telling the current pressures are the new reference — a quick dashboard reset.

The Talento was Fiat’s badge-engineered version of the Renault Trafic III, built from 2016 until Fiat Professional withdrew it in 2021; it revived the ‘Talento’ name Fiat had last used on a small van in the early 1990s.

Set the Pressures First

Inflate the tyres to the correct pressures cold before resetting — the reset memorises whatever’s in the tyres as the target. The figures are on the label in the driver’s door aperture and differ unladen vs fully loaded.

Reset the Tyre Pressure Warning

  1. With the van stopped, turn the ignition on.
  2. Scroll the dashboard menu to ‘Tyre pressure’ (on some vans via the ‘Vehicle’ menu first).
  3. Press and hold the OK/reset button for at least 3 seconds until a confirmation shows.
  4. Drive the van to relearn and complete the reset.

Frequently Asked Questions

Is the Fiat Talento just a rebadged Renault Trafic?

Yes — the 2016–2021 Talento is Fiat’s version of the Renault Trafic III, sharing its running gear with the Nissan NV300 and Vauxhall/Opel Vivaro. Fiat dropped it in 2021 when it switched to the Stellantis (Peugeot-based) Scudo and Ducato range.

How do I reset the tyre pressure light on a Fiat Talento?

Ignition on, select ‘Tyre pressure’, hold OK for about three seconds until it confirms, then drive. Set the correct cold pressures first.

Why won’t the warning go off?

Either a tyre is genuinely low — check and inflate all of them — or the system wasn’t reset after the last adjustment.

Do I reset after fitting the spare?

Yes — any wheel or tyre change means resetting the reference once the correct pressures are set.

Is it the same as a Renault Trafic?

Yes — as a rebadged Renault Trafic it uses the same dashboard system, so the reset is identical across the Renault Trafic, Nissan NV300 and Vauxhall/Opel Vivaro.

If a warning light or fault code appeared, look it up on autodtcs.com.

Independent guide — not affiliated with Fiat. Always follow your official service manual and safety precautions. Read our full disclaimer.

Tire tools: Changed tire size or just adjusting pressures? Use our free non-stock tire pressure calculator, bar/PSI/kPa converter and tire size comparison tool.
Related Articles
  • Open the Bonnet
  • Reinitialise the Electric Windows
  • Turn the Stop-Start System On or Off
  • Disconnect and Reconnect the Battery
  • Unlock and Start With a Dead Key Fob
  • Jump-Start a Flat Battery

Service Reset

Step-by-step reset and maintenance guides for all major car brands. Independent resource – not affiliated with any car manufacturer. All trademarks and logos are the property of their respective owners and are used for identification purposes only.

© 2026 ServiceReset.net. All rights reserved.

POPULAR BRANDS
Toyota · Volkswagen · BMW · Ford · Audi · Mercedes · Nissan · Peugeot · Vauxhall · Kia
NAVIGATION
  • Home
  • Guides
  • Dashboard Warning Lights
  • Tools
  • Tire Pressure Calculator
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
SOCIAL
  • YouTube
  • Pinterest