These instructions apply to the Vauxhall Insignia Mk1 (G09) 2008-2017.
For other models, please choose your vehicle here.
On halogen-equipped Vauxhall Insignia A models the headlight bulbs are reached from inside the engine bay, so most owners can change a blown bulb without removing the headlamp. The low and high beams use separate bulbs.
Change a headlight bulb
- Switch the lights and ignition off and open the hood.
- At the back of the headlamp, twist off the round cover for the bulb you need: the outer bulb is the low beam, the inner bulb is the high beam.
- Unclip the retaining spring or twist the bulb holder, and withdraw the bulb.
- Fit the new bulb, handling it by the metal base only — oil from fingers shortens halogen bulb life.
- Refit the holder/spring and the cover, then test the light.
Insignia A bulb types
- Low (dipped) beam: H7
- High (main) beam: H1
- Front turn signal: PY21W (amber, 581)
- Front fog light: accessed from under the car — check the exact bulb fitted (commonly H10 or H11) before buying
Can I change the bulbs myself on a Xenon or LED Insignia?
No. Cars with Xenon/HID headlamps run at very high voltage and the bulbs (and the LED sidelights on some trims) must be changed by a workshop. Only the halogen headlamp bulbs are an owner job.
My new bulb still doesn’t work — why?
Check it is seated fully and the connector is clicked home. If both beams on one side are dead, suspect the fuse or connector rather than the bulbs; a single dead beam is almost always the bulb itself.
Independent guide — not affiliated with Vauxhall. Always follow your official service manual and safety precautions. Read our full disclaimer.