• Home
  • Guides
  • Tire Pressure Calculator
  • Check DTC Codes
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact Us
  • Tools
  • Home
  • Guides
  • Tire Pressure Calculator
  • Check DTC Codes
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact Us
  • Tools
Home/Tesla/Model 3/(2017-2024)/Disconnect and Reconnect the 12V Battery

Disconnect and Reconnect the 12V Battery

These instructions apply to the Tesla Model 3 (2017-2024). For other models, please choose your vehicle here.

Last updated: June 12, 2026

Disconnecting the 12 V battery on your Tesla Model 3 (2017–2024) — for storage or before work near the airbags — is the low-voltage battery only. The high-voltage drive battery is sealed and must never be touched. The 12 V battery is at the front of the car.

Find the 12 V Battery First

The 12 V battery is at the front of the car, accessed by removing the front trunk (frunk) tub and the cowl/trim beneath it. Note your saved settings first — though most are stored in your Tesla account.

High voltage: never touch the orange high-voltage cabling. This procedure is only the 12 V battery.

Disconnecting Safely

  1. Power the car off from the touchscreen (Controls > Safety > Power Off) and wait a couple of minutes.
  2. Open the frunk and remove the tub/cowl trim to reach the battery.
  3. Disconnect the negative (−) terminal first, then the positive.
  4. Working near airbags? Wait a few minutes after disconnecting.

Reconnecting

Reconnect positive first, then negative. Afterwards:

  • The car re-establishes its systems — allow it a minute before driving.
  • Tyre pressure monitor — drive to re-store the pressures.
  • Refit the cowl and frunk trim.

If Something Isn’t Right Afterwards

  • Warning messages often clear after a short drive.
  • A persistent alert stores a code — look it up on autodtcs.com.
  • Fit the correct 12 V battery type for your build (early cars use a lead-acid unit; later cars a Li-ion 12 V).

Frequently Asked Questions

Where is the 12 V battery on a Tesla Model 3?

At the front, under the frunk tub and cowl trim — separate from the high-voltage battery.

Is it safe to disconnect?

Yes — the 12 V battery is low voltage. Never touch the orange high-voltage cabling.

Which terminal first?

Negative (−) off first, reconnect it last.

Will I lose my settings?

Most profile settings are tied to your Tesla account and restore automatically.

If a warning message stays on after reconnecting, look up the code on autodtcs.com.

Disclaimer: The information on this page is provided for general guidance only. Always follow your official service manual and safety precautions when working on your vehicle. We are not responsible for errors, omissions, or any damage resulting from the use of this information.

This website is an independent resource and is not affiliated with, endorsed by, or sponsored by Tesla. All trademarks and brand names belong to their respective owners.

Was this helpful?

Yes  No
Related Articles
  • Reset the Tyre Pressure Monitor (TPMS)
  • Replace the Key Fob Battery
  • Reset the Service Indicator

Didn't find your answer? Contact Us

(2017-2024)
  • Disconnect and Reconnect the 12V Battery
  • Reset the Service Indicator
  • Replace the Key Fob Battery
  • Reset the Tyre Pressure Monitor (TPMS)

Service Reset

Step-by-step reset and maintenance guides for all major car brands. Independent resource – not affiliated with any car manufacturer. All trademarks and logos are the property of their respective owners and are used for identification purposes only.

© 2026 ServiceReset.net. All rights reserved.

POPULAR BRANDS
Toyota · Volkswagen · BMW · Ford · Audi · Mercedes · Nissan · Peugeot · Vauxhall · Kia
NAVIGATION
  • Home
  • Guides
  • Tools
  • Tire Pressure Calculator
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
SOCIAL
  • YouTube