Suzuki Swift AZG/AZH (2010 - 2017)

The Suzuki Swift AZG/AZH (2010–2017) generation offered an updated design, improved fuel efficiency, and modern electronic features. These vehicles use a range of service reminders and onboard systems that must be reset after maintenance or repairs.

For this generation, common reset procedures include the oil service reminder reset, maintenance light reset, TPMS reset, and initialization of systems such as the start/stop function and power windows. Performing these resets keeps the dashboard displays accurate and ensures all systems function correctly after servicing.

Our reset guides are written in clear, step-by-step instructions, making them suitable for both DIY car owners and professional workshops.

Browse the list of reset procedures below and select the one that matches the maintenance task you need to complete on your Suzuki Swift AZG/AZH.

Home/Suzuki/Swift/AZG/AZH (2010 - 2017)/

Change and Check Automatic Transmission Fluid (4AT)

The Suzuki Swift equipped with the 4-speed automatic transmission (4AT) requires proper fluid maintenance to ensure smooth shifting and long service life. This guide explains how to drain, refill, and check the ATF (Automatic Transmission Fluid). Draining and Refilling the ATF Raise the vehicle securely. Remove the engine lower cover. Remove the drain plug and […]

Reset the Tyre Pressure Monitoring System (TPMS)

The Tyre Pressure Monitoring System (TPMS) in the Suzuki Swift monitors tyre pressures and alerts the driver when they are too low. After tyre maintenance or replacement, the system may need to be re-initialized to function correctly. When a Reset is Required After checking or adjusting tyre pressures. After replacing one or more tyres or […]

Initialize the Electric Sunroof

If the battery has been disconnected or replaced, the electric sliding/tilting roof in the Suzuki Swift may lose its memory. To restore normal operation, the sunroof must be re-initialized. Initialization Procedure Switch the ignition ON. Push the sunroof switch upwards to the maximum tilt position. Hold the switch for about 15 seconds. Release the switch. […]

Disconnect and Reconnect the Battery

When replacing or working on the battery in the Suzuki Swift, it’s important to follow the correct procedure. This ensures that electronic systems reset properly and safety components remain unaffected. After Disconnecting the Battery If working on pyrotechnic components (such as airbags or seat belt pretensioners), wait at least 90 seconds before beginning any work. […]

Initialize Power Windows

If the battery has been disconnected or the fuse system has been reset, the power windows in the Suzuki Swift may lose their automatic function. To restore one-touch operation, the windows need to be re-initialized. Initialization Procedure Switch the ignition OFF. Locate the interior fusebox on the driver’s side left pillar near the pedals. Disconnect […]

Enable or Disable the Start/Stop System

The Start/Stop system in the Suzuki Swift is designed to reduce fuel consumption by shutting off the engine when the vehicle is stationary. In some situations, such as during maintenance or personal preference, you may want to deactivate the feature. Before Working on the Engine Always make sure the Start/Stop system is deactivated before carrying […]

Reset the Oil Service Indicator

The oil service indicator in the Suzuki Swift is designed to remind you when routine maintenance is due. After completing an oil change or scheduled service, you can reset the reminder using one of two manual methods. Method 1: Reset via Menu Switch the ignition ON. Press the dashboard button repeatedly until RANGE appears on […]