• Home
  • Tire Pressure Calculator
  • Check DTC Codes
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact Us
  • Tools
  • Home
  • Tire Pressure Calculator
  • Check DTC Codes
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact Us
  • Tools
Home/BMW/1 Series/Mk3 (F40) 2019-Present/Reset the Tyre Pressure Monitor (TPMS)

Reset the Tyre Pressure Monitor (TPMS)

These instructions apply to the BMW 1 Series Mk3 (F40) 2019-Present. For other models, please choose your vehicle here.

Last updated: June 6, 2026

If the tyre-pressure warning is on in your BMW 1 Series Mk3 (F40, 2019–present) after adjusting pressures or changing wheels, you set the current pressures as the new reference through iDrive, then confirm with a short drive. Here’s how.

Set the Pressures First

Inflate all four tyres cold to the figure on the label in the driver’s door opening (BMW lists pressures by load — use the right values).

How to Reset the F40 TPMS

  1. With the ignition on, open iDrive and go to the ‘CAR’ / Vehicle menu.
  2. Select ‘Tyre Pressure Monitor’ (tyre pressures).
  3. Choose ‘Perform Reset’ / ‘Reset’ and confirm.
  4. Drive off — the system learns the new pressures as you drive and the warning clears.

If the Warning Stays On

  • Re-check every tyre, including the spare if it’s a monitored full-size wheel.
  • One tyre keeps dropping — look for a slow puncture; the system is doing its job.
  • A steady-flashing TPMS light points to a sensor fault and needs a tyre shop’s tool.

Frequently Asked Questions

Where is the tyre-pressure reset on the F40?

In iDrive: CAR/Vehicle → Tyre Pressure Monitor → Perform Reset, then drive.

Do I need a tool?

Not for a normal reset — set the pressures, reset in iDrive, and drive. A tool is only needed if sensors were replaced.

Why did the light come on in the cold?

Pressure drops with temperature. Top up to the door-label figure and reset.

The light keeps flashing — low pressure?

A persistent flash usually means a sensor fault rather than low pressure — have the sensors checked.

If a fault code is stored, look it up on autodtcs.com. To clear a service reminder, see our 1 Series F40 service reset guide.

Disclaimer: The information on this page is provided for general guidance only. Always follow your official service manual and safety precautions when working on your vehicle. We are not responsible for errors, omissions, or any damage resulting from the use of this information.

This website is an independent resource and is not affiliated with, endorsed by, or sponsored by BMW. All trademarks and brand names belong to their respective owners.

Tyre tools: Changed tyre size or just adjusting pressures? Use our free non-stock tyre pressure calculator, bar/PSI/kPa converter and tyre size comparison tool.

Was this helpful?

Yes  No
Related Articles
  • Start the Car With a Dead Key Fob Battery
  • Reset a Frozen Infotainment Screen
  • Enable or Disable the Auto Start-Stop System
  • Replace the Key Fob Battery
  • Check the Oil Level (No Dipstick)
  • Disconnect and Reconnect the Battery

Didn't find your answer? Contact Us

Mk3 (F40) 2019-Present
  • Reset the Tyre Pressure Monitor (TPMS)
  • Reset the Service Indicator (CBS)
  • Disconnect and Reconnect the Battery
  • Check the Oil Level (No Dipstick)
  • Replace the Key Fob Battery
  • Enable or Disable the Auto Start-Stop System
  • Reset a Frozen Infotainment Screen
  • Start the Car With a Dead Key Fob Battery

Service Reset

Step-by-step reset and maintenance guides for all major car brands. Independent resource – not affiliated with any car manufacturer. All trademarks and logos are the property of their respective owners and are used for identification purposes only.

© 2026 ServiceReset.net. All rights reserved.

NAVIGATION
  • Home
  • About
  • Tire Pressure Calculator
  • Blog
  • FAQ
  • Request a Guide
  • Contact
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
SOCIAL
  • YouTube