Reset the Service Indicator

The BMW X5 (G05, 2018–present) uses Condition Based Servicing (CBS), so you reset each service item from the dash with the trip button — no tools needed. Do the work first; a CBS item only resets once it’s at 90% or less of its life.

How to Reset the Service Light on a BMW X5 (G05)

1. Close all the doors. Press the Start/Stop button quickly 3 times to wake the car (don’t start the engine; don’t press the brake).
2. Press and hold the trip-reset button on the cluster. After about 10 seconds the first service item appears.
3. Press the button to scroll through the items (Engine oil, Vehicle check, brakes, etc.).
4. On the item you want, when “Reset possible” shows, press and hold for about 3 seconds — “Perform reset?” appears.
5. Press and hold again for 3 seconds until “Reset successful” shows. Reset Engine oil before Vehicle check if both are due.

Good to Know

• An item only resets at 90% or less of its remaining life — a nearly-new interval won’t reset.
• The brakes item resets only if the brake-wear sensor is working.
• Keep the clock correct; disconnecting the battery stops the CBS clock.
• BMW’s recommended method is the diagnostic tool, but the trip-button method above does the owner oil and inspection resets.

Frequently Asked Questions

Where is the reset button on an X5 G05?

It’s the small trip/BC button on the instrument cluster. Wake the car (Start/Stop 3 times, engine off) and hold the button to enter the CBS menu.

Why won’t the service item reset?

CBS blocks a reset until the item is at 90% or less of its life, so a freshly-reset or nearly-new item can’t be zeroed. The brakes item also needs a healthy wear sensor.

Do I need a scan tool?

No for the standard oil/inspection resets — the trip button does it. A tool is only needed for coding or key programming.

If a fault code shows alongside the service message, look it up on our sister site autodtcs.com.