Service ResetService Reset
  • Home
  • Guides
  • Diagnostics
  • Tools
    • Tire Pressure Calculator
    • Request a Guide
    • Wheel Offset Calculator
    • Tire Size Comparison
    • Tire Pressure Converter
    • Torque Converter
    • Coolant & Antifreeze Mix
  • Blog
  • About
  • FAQ
  • Contact Us
  • Home
  • Guides
  • Diagnostics
  • Tools
    • Tire Pressure Calculator
    • Request a Guide
    • Wheel Offset Calculator
    • Tire Size Comparison
    • Tire Pressure Converter
    • Torque Converter
    • Coolant & Antifreeze Mix
  • Blog
  • About
  • FAQ
  • Contact Us
Home/Chevrolet/Silverado 1500/Mk2 (GMT900) 2007-2013/Replace the Key Fob Battery

Replace the Key Fob Battery

Reviewed by the Service Reset editor · Updated October 15, 2026 · How we verify

These instructions apply to the Chevrolet Silverado 1500 Mk2 (GMT900) 2007-2013.
For other models, please choose your vehicle here.

When the Driver Information Center on your 2007-2013 Chevrolet Silverado 1500 (GMT900) shows “REPLACE BATTERY IN REMOTE KEY”, or the remote’s range drops off, the key-fob battery is flat. It is a quick home fix with one common coin cell.

What you need

One CR2032 3-volt coin cell (or equivalent) and a thin, flat tool such as a small flat-blade screwdriver. Handle the new cell by its edges – skin oils shorten its life.

How to replace the key-fob battery

  1. Find the notch on the side seam of the transmitter.
  2. Insert the thin flat tool into the notch and gently twist to split the fob into two halves.
  3. Lift out the old battery. Don’t use a metal object that could short the terminals, and don’t touch the circuit board.
  4. Fit the new CR2032 with the positive (+) side facing down (matching the old cell’s orientation).
  5. Snap the two halves firmly back together.
  6. Test lock, unlock and – if fitted – remote start. The “REPLACE BATTERY” message clears on its own once the new cell is working.

Frequently asked questions

What battery does a 2007-2013 Silverado key fob use?

A single CR2032 3-volt coin cell, fitted positive-side down.

Do I have to reprogram the remote after changing the battery?

No. Replacing the battery does not erase the programming – lock and unlock work again as soon as the new cell is in. Reprogramming is only needed if you add a brand-new remote.

My remote still won’t work after a new battery – what now?

Check the battery is the right way up (positive down) and seated, and that the two halves are fully closed. You can still lock and start the truck with the key and ignition; if the remote is truly dead it may need re-synchronizing at a dealer.

Independent guide — not affiliated with Chevrolet. Always follow your official service manual and safety precautions. Read our full disclaimer.

Related Articles
  • Chevrolet Silverado 1500 Specifications (2007-2013)
  • Reset the Tire Pressure Monitor (TPMS)
  • Disconnect & Reconnect the 12-Volt Battery
  • Reset the Engine Oil Life System

On This Page: [hide]

What you need

How to replace the key-fob battery

Frequently asked questions

What battery does a 2007-2013 Silverado key fob use?

Do I have to reprogram the remote after changing the battery?

My remote still won’t work after a new battery – what now?

Service Reset

Independent step-by-step car reset & maintenance guides – not affiliated with any manufacturer. All trademarks belong to their respective owners.

© 2026 ServiceReset.net. All rights reserved.

POPULAR BRANDS
Toyota · Volkswagen · BMW · Ford · Audi · Mercedes · Nissan · Kia
EXPLORE
  • Guides
  • Blog
  • About
  • Contact
TOOLS
  • Dashboard Warning Lights
  • Tire Pressure Calculator
  • Tools
  • FAQ
  • Request a Guide
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
  • YouTube
  • Pinterest