These instructions apply to the Dacia Sandero Mk2 (X52) 2012-2020.
For other models, please choose your vehicle here.
On the Dacia Sandero (Mk2 / X52, 2012–2020) the 12V battery is in the engine bay, at the front. Disconnecting it is a simple job; just follow the order and the after-steps below.
How to Disconnect and Reconnect the Sandero (Mk2) Battery
- Note your radio code if you have one, switch everything off and remove the key (ignition OFF).
- Open the hood and find the battery; lift any terminal cover.
- Disconnect the negative (−, earth) terminal first, then the positive if needed.
- Do your work. To reconnect, fit the positive (+) first, then the negative, and tighten both clamps.
- Switch the ignition on and let the car settle for a moment before starting.
After Reconnecting
- Re-enter the radio/display security code if prompted, and reset the clock.
- The one-touch driver’s window (where fitted) may need re-setting — hold the switch fully up for a second after the window closes.
- If Stop & Start doesn’t work at first, a short drive lets the battery-charge monitor re-learn.
Frequently Asked Questions
Where is the battery on a Dacia Sandero Mk2?
In the engine bay at the front — there’s no boot-mounted battery on the Sandero.
Will disconnecting the battery reset the service light?
No — the service interval is stored separately. Use the pedal or wiper-stalk method to reset the service light.
If a warning light stays on after reconnecting, look the code up on autodtcs.com.
Independent guide — not affiliated with Dacia. Always follow your official service manual and safety precautions. Read our full disclaimer.