These instructions apply to the Dacia Sandero Mk2 (X52) 2012-2020.
For other models, please choose your vehicle here.
The Dacia Sandero (Mk2 / X52, 2012–2020) resets its service light from the driver’s seat — no tools needed. There are two owner methods depending on whether your trim has the extra button on the wiper stalk. Change the oil and filter first; the reset only clears the message.
Method 1 — Pedal Method (no stalk button)
- Put the gearbox in neutral and switch the ignition on (engine off).
- Within 10 seconds, press and hold the accelerator pedal fully.
- Keeping the accelerator held, press and release the brake pedal 3 times.
- Release both pedals at the same time — the service indicator is reset.
- Repeat the procedure if the message is still showing.
Method 2 — Wiper-Stalk Button
- Select neutral and switch the ignition on.
- Press the button on the end of the wiper stalk repeatedly until the mileage (odometer) reading shows.
- Press and hold the button — the new service interval appears on the display.
- Release the button. The service indicator is reset.
Frequently Asked Questions
Which method does my Sandero use?
If there’s a button on the tip of the wiper stalk, use Method 2. If not, use the accelerator-and-brake pedal sequence (Method 1). Both are owner procedures — no tool required.
Does resetting the light service the car?
No — it only clears the reminder and restarts the interval. Always change the oil and filter first.
The light won’t reset — what now?
Make sure you’re in neutral, ignition on (engine off), and do the sequence within the 10-second window. If it still won’t clear, a Dacia tool can reset it (Method 3 at a garage).
If a fault code shows alongside the service message, look it up on our sister site autodtcs.com.
Independent guide — not affiliated with Dacia. Always follow your official service manual and safety precautions. Read our full disclaimer.