These instructions apply to the Honda Accord Mk10 (CV) 2018-2022.
For other models, please choose your vehicle here.
The 2018–2022 Honda Accord uses an indirect TPMS — it has no wheel sensors, so after adjusting pressures, rotating, or replacing tires you calibrate it from the settings menu. No tool needed. This is the US-market procedure.
- Set all four tires to the correct cold pressure (table below). Park, transmission in P, power mode ON.
- On the color-audio car: MENU/CLOCK → Settings → Vehicle Settings → TPMS Calibration → Calibrate. On the Display Audio car: HOME → Settings → Vehicle → TPMS Calibration → Calibrate.
- Drive about 30 minutes at 30–60 mph (cumulative) to finish. It completes automatically.
Honda Accord tire pressures (cold)
| Tire size | Front | Rear |
|---|---|---|
| 225/50R17 | 32 psi | 32 psi |
| 235/40R19 | 33 psi | 33 psi |
| Compact spare | 60 psi | 60 psi |
FAQ
Why is there no per-tire pressure readout?
The 10th-gen Accord’s TPMS is indirect — it infers low pressure from wheel-speed differences rather than per-wheel sensors, so it shows a warning, not live numbers.
When do I calibrate?
After adjusting pressures, rotating, or fitting new tires — and always from correct cold pressures.
“Calibration Failed To Start.”
Repeat the menu steps with the car stopped in Park; then drive to complete it. You can’t calibrate with the compact spare fitted.
If your Accord stores a fault code with the warning light, look it up on autodtcs.com.
Independent guide — not affiliated with Honda. Always follow your official service manual and safety precautions. Read our full disclaimer.