Check the Engine Oil Level (No Dipstick)

Last updated: June 8, 2026

Your Jaguar XF (2015–present) has no dipstick — you check the engine oil level electronically, through the driver display. It catches owners out, but once you know where to look it takes a minute. Here’s how to get an accurate reading.

Before You Check

For an accurate electronic reading the XF needs to be:

• On level ground;
• at operating temperature (drive it, then let it stand a few minutes so the oil drains back);
• with the engine off.

Checking the Oil Level

1. Switch the ignition on (engine off).
2. Scroll the driver information display to the vehicle/service menu.
3. Select the engine oil level readout.
4. The display shows the level on a scale. Top up only if it reads low, a little at a time, re-checking — don’t overfill.

Use the oil specification on the filler cap / in the handbook — it differs between the petrol and diesel XF engines.

If the Reading Looks Wrong

• ‘Not available’ usually means the engine is too hot or the car isn’t level — let it stand and retry on flat ground.
• Don’t overfill — add small amounts and recheck.
• Oil warning light on? Stop and investigate — a pressure warning differs from a low-level message; a code can be read on autodtcs.com.

Frequently Asked Questions

How do I check the oil on a Jaguar XF without a dipstick?

Ignition on (engine off), use the driver display menu to read the engine oil level — it has an electronic sensor instead of a dipstick.

Should the engine be hot or cold?

Warm it, then let it stand a few minutes on level ground so the oil settles.

How much oil do I add?

A little at a time, re-checking the display — never overfill.

What oil does the XF use?

The grade is engine-specific — use what’s on the filler cap / in the handbook.

If a service reminder is showing, see our XF service-indicator reset guide.