These instructions apply to the Toyota 4Runner Mk5 (N280) 2010-2024.
For other models, please choose your vehicle here.
Full specifications for the fifth-generation Toyota 4Runner (N280, 2010-2024), powered the whole run by the 4.0L 1GR-FE V6 through a 5-speed automatic. Output, towing, ground clearance and dimensions are cross-checked; fluids and capacities are from the owner manual.
Each column is one specific vehicle — a single engine or motor and, where shown, body style. Dimensions and several weights are specific to that body and drivetrain; other body or powertrain versions differ, so match the column to your own vehicle.
| 4.0L 1GR-FE V6US | |
|---|---|
| Length | 190.2 in (4,831 mm; 191.3 in Limited) mm |
| Width (excl. mirrors) | 75.8 in (1,925 mm) mm |
| Height | 71.5 in (1,816 mm) mm |
| Wheelbase | 109.8 in (2,789 mm) mm |
| Track (front / rear) | — |
| Ground clearance | 9.0 in (4x2) / 9.6 in (4x4) |
| 4.0L 1GR-FE V6US | |
|---|---|
| Kerb weight | 4,400-4,805 lb (by trim/drive) kg |
| Gross vehicle weight | 6,100 lb (4x2) / 6,300 lb (4x4) kg |
| Payload (approx.) | — |
| Max axle load, front | — |
| Max axle load, rear | — |
| Towing (braked trailer) | 5,000 lb |
| 4.0L 1GR-FE V6US | |
|---|---|
| Engine code | 1GR-FE |
| Fuel | Petrol |
| Cylinders / layout | 6, V |
| Displacement | 3,956 cc (4.0 L) cc |
| Max power | 270 hp (201 kW) @ 5,600 rpm |
| Max torque | 278 lb-ft (377 Nm) @ 4,400 rpm |
| Aspiration | Naturally aspirated |
| Emission standard | — |
| 4.0L 1GR-FE V6US | |
|---|---|
| 0–100 km/h (0–60 mph) | — |
| Top speed | — |
| Drive | Rear-, part-time or full-time four-wheel drive |
| Transmission | 5-speed automatic |
| 4.0L 1GR-FE V6US | |
|---|---|
| Fuel consumption (combined) | 17 mpg (EPA combined; 2013-2024) |
| Urban / extra-urban | — |
| CO₂ (combined) | — |
| Fuel tank | 87 L (23.0 US gal) |
| Drive-by noise | — |
| 4.0L 1GR-FE V6US | |
|---|---|
| Front brakes | — |
| Rear brakes | — |
| Tyre sizes | P265/70R17, P245/60R20 |
| Rim sizes | — |
| Tyre pressures, normal (front / rear) | 32 psi front & rear; spare 32 psi |
| Tyre pressures, laden (front / rear) | — |
| Wheel-nut torque | 112 Nm (83 lb-ft, steel) / 103 Nm (76 lb-ft, alloy) |
| 4.0L 1GR-FE V6US | |
|---|---|
| Engine oil (with filter) | 6.2 L (6.6 qt) · SAE 0W-20 |
| Coolant | 10.5 L · Toyota SLLC (50/50) |
| Gearbox oil (manual) | — |
| 12 V battery | Engine bay · see OE label for group/CCA |
| Air-con refrigerant | — |
| Spark plugs | — |
| Spark-plug gap | 1.1 mm (0.043 in) |
Sources: Owner's manual. Where an owner’s manual or homologation figure exists it takes precedence; workshop data fills only what those omit.
A dash (—) means we haven’t verified that figure for that variant yet. Figures are US-market. Towing, payload and weights are best-case/config-dependent — your door-jamb label is the authority.
Frequently Asked Questions
How much power and towing does the 4Runner have?
270 hp and 278 lb-ft, rated to tow 5,000 lb — unchanged across 2010-2024.
What is the ground clearance?
9.0 inches on 2WD models and 9.6 inches on 4WD.
What oil does it take?
0W-20, about 6.6 qt with a new filter.
What tire pressures?
32 psi front and rear on both the 17- and 20-inch fitments; check your door placard.
Disclaimer: Specifications vary by model year, trim, cab and options. Always confirm critical figures (towing, weights, tire sizes) against your own vehicle’s door label and documents.
Servicing your Toyota 4Runner? Browse the Toyota 4Runner guides, and decode any fault code on autodtcs.com.
Independent guide — not affiliated with Toyota. Always follow your official service manual and safety precautions. Read our full disclaimer.