These instructions apply to the Toyota Camry Mk8 (XV70) 2018-2024.
For other models, please choose your vehicle here.
The 2018–2024 Toyota Camry (XV70) has a direct TPMS with a sensor in each wheel. After a rotation or a pressure change you re-initialize it from the multi-information display — no scan tool. This is the US-market procedure.
- Park with the engine off for at least 20 minutes, then set all four tires to the correct cold pressure (table below).
- Start the engine and open the settings screen on the multi-information display (meter switches). On the 4.2-inch display select Vehicle Settings; on the 7-inch display press and hold the menu icon.
- Select TPWS, then Set Pressure, and press and hold until the TPMS light blinks three times. The display shows “- -” while it learns.
- On cars with the pressure display, drive at 25 mph (40 km/h) or more for 10–30 minutes to finish.
Toyota Camry tire pressures (cold)
By fitted tire size — your driver-door placard is the final authority:
| Tire size | Front | Rear |
|---|---|---|
| 205/65R16 | 35 psi | 35 psi |
| 215/55R17 | 35 psi | 35 psi |
| 235/45R18 | 35 psi | 35 psi |
| 235/40R19 (92V) | 35 psi | 35 psi |
| 235/40R19 (96Y) | 33 psi | 33 psi |
| All-wheel-drive models | 36 psi | 36 psi |
| Compact spare | 60 psi | 60 psi |
FAQ
Is there a reset button?
No — the reset is in the multi-information display (TPWS → Set Pressure, held until the light blinks three times), then a short drive.
Do I need a tool?
No tool to re-initialize. Cars with the pressure display can also register new sensor IDs from the TPWS menu; base cars without the display need a dealer for new-sensor registration.
The light stays on.
Re-check cold pressures, repeat the Set Pressure step, and drive above 25 mph for 10–30 minutes. A dead sensor battery needs replacing.
If your Camry stores a fault code with the warning light, look it up on autodtcs.com.
Independent guide — not affiliated with Toyota. Always follow your official service manual and safety precautions. Read our full disclaimer.