These instructions apply to the Vauxhall Insignia Mk2 (Z18) 2017-2022.
For other models, please choose your vehicle here.
If the 12-volt battery is flat on an automatic Vauxhall Insignia B, the gear selector can lock in P and the car cannot be moved or towed. The 8-speed automatic has a mechanical shift-lock override under the selector cover so you can free it.
Release the gear selector from Park
- Apply the parking brake and chock the wheels so the car cannot roll once it is out of Park.
- Carefully pry off the trim cover around the gear selector.
- Insert a small flat screwdriver into the shift-lock override opening and press down as shown on the override.
- Hold it pressed and move the selector out of P.
- Remove the screwdriver and refit the selector cover.
If the selector still will not move, or the fault returns, have the car checked by a dealer — a flat battery is the usual cause, so charge it before relying on the car again.
Why is my Insignia stuck in Park?
The shift lock needs power and a brake-pedal signal to release normally. A flat battery, a blown fuse, or a faulty brake-light switch all stop the selector leaving P, which is when the manual override above is needed.
Independent guide — not affiliated with Vauxhall. Always follow your official service manual and safety precautions. Read our full disclaimer.