These instructions apply to the Vauxhall Insignia Mk2 (Z18) 2017-2022.
For other models, please choose your vehicle here.
A weak remote or keyless fob on the Vauxhall Insignia B usually just needs a fresh coin cell. The flip key uses a CR2032 battery and the swap takes a couple of minutes.
Replace the key fob battery
- Flip out the metal emergency key blade.
- Split the fob along its seam using the slot near the keyring eye (a coin or small flat screwdriver helps).
- Remove the old CR2032 cell, noting its orientation.
- Fit the new CR2032 the same way up, handling it by the edge.
- Snap the halves together and refit the blade.
What battery does the Insignia B key use?
A CR2032 3-volt lithium coin cell. This covers both the standard flip key and the keyless-entry fob.
Keyless car won’t detect the fob — is it the battery?
A flat fob battery is the usual cause of a keyless car not recognizing the key. As a backup you can start the car by holding the fob against the marked spot (often the start button or steering column) and pressing start — then change the cell.
Independent guide — not affiliated with Vauxhall. Always follow your official service manual and safety precautions. Read our full disclaimer.