• Home
  • Tire Pressure Calculator
  • Check DTC Codes
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact Us
  • Tools
  • Home
  • Tire Pressure Calculator
  • Check DTC Codes
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact Us
  • Tools
Home/BMW/X1/Mk2 (F48) 2015-2022/Reinitialise the Electric Windows

Reinitialise the Electric Windows

These instructions apply to the BMW X1 Mk2 (F48) 2015-2022. For other models, please choose your vehicle here.

Last updated: June 6, 2026

If the one-touch (auto up/down) windows stop working on your BMW X1 (F48, 2015–2022) — usually after the battery was disconnected or went flat — the window motor has lost its learned end-stops and anti-trap reference. Re-teaching it takes seconds per door, no tools.

Why It Happens

The window controller remembers the fully-closed position so one-touch can stop correctly and the anti-trap can work. A power interruption clears that memory, leaving only hold-to-move operation.

How to Re-initialise a Window

  1. Sit in the car with the door closed and the ignition on.
  2. Pull the switch up to fully close the window and keep holding for a few seconds after it stops.
  3. Release, then push the switch down to fully open and hold a moment at the bottom.
  4. Pull up again to fully close and hold for a few seconds at the top.
  5. Release and test one-touch up and down — it should now run on its own.

Repeat for each affected window using its own switch.

If One-Touch Still Doesn’t Work

  • Hold a little longer at the fully-closed stop — the controller needs to register the top limit.
  • Make sure the door is shut and the battery is healthy during the learn.

Frequently Asked Questions

Why did my X1 windows stop going up automatically?

A battery disconnect or flat battery wiped the learned position; re-initialise to restore one-touch.

How do I reset the auto window on a BMW X1?

Hold the switch up to fully close and keep holding a few seconds; if needed, fully open and fully close again, holding at the top.

Do I have to do every window?

Only the ones with one-touch — re-teach each from its own switch.

Do I need a tool?

No — it’s done entirely from the window switches.

This is the step most owners miss after battery work — see our X1 battery guide. For warning lights, look up the code on autodtcs.com.

Disclaimer: The information on this page is provided for general guidance only. Always follow your official service manual and safety precautions when working on your vehicle. We are not responsible for errors, omissions, or any damage resulting from the use of this information.

This website is an independent resource and is not affiliated with, endorsed by, or sponsored by BMW. All trademarks and brand names belong to their respective owners.

Was this helpful?

Yes  No
Related Articles
  • Start the Car With a Dead Key Fob Battery
  • Reset a Frozen Infotainment Screen
  • Use the Automatic Emergency Park Release
  • Reinitialise the Sunroof
  • Check the Engine Oil Level (No Dipstick)
  • Reset the Tyre Pressure Monitor (TPMS)

Didn't find your answer? Contact Us

Mk2 (F48) 2015-2022
  • Reinitialise the Electric Windows
  • Reset the Service Indicator (CBS)
  • Disconnect and Reconnect the Battery
  • Replace the Key Fob Battery
  • Disable the Auto Start-Stop System
  • Reset the Tyre Pressure Monitor (TPMS)
  • Check the Engine Oil Level (No Dipstick)
  • Reinitialise the Sunroof
  • Use the Automatic Emergency Park Release
  • Reset a Frozen Infotainment Screen
  • Start the Car With a Dead Key Fob Battery

Service Reset

Step-by-step reset and maintenance guides for all major car brands. Independent resource – not affiliated with any car manufacturer. All trademarks and logos are the property of their respective owners and are used for identification purposes only.

© 2026 ServiceReset.net. All rights reserved.

NAVIGATION
  • Home
  • About
  • Tire Pressure Calculator
  • Blog
  • FAQ
  • Request a Guide
  • Contact
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
SOCIAL
  • YouTube