These instructions apply to the Kia Ceed Mk2 (JD) 2012-2018. For other models, please choose your vehicle here.
Last updated:
When the tyre-pressure warning light comes on in your Kia Cee’d Mk2 (JD, 2012–2018), it usually just means the system needs to relearn your current pressures after a check, top-up or wheel change. The Cee’d relearns itself as you drive — there is no reset button. This guide explains how to clear the light correctly.
How the Cee’d System Works
The Mk2 Cee’d uses a direct tyre-pressure monitoring system with a sensor in each wheel, and it relearns automatically: once the pressures are correct, you simply drive the car and the system stores the new readings. There is no menu step or button — the light clears on its own provided the tyres are actually at the right pressure and you drive far enough.
When the Light Comes On
- After a tyre-pressure check or adjustment.
- After changing one or more wheels or tyres.
- After rotating the wheels.
- In cold weather, when pressures drop naturally.
Set Your Pressures First
The system learns from whatever is in the tyres, so they must be correct before you drive. Set all four (cold) to the figures on the placard in the driver’s door aperture, using the laden column for a full load. Do not try to clear the light while a tyre is still low — fix the pressure first.
How to Reset the Cee’d TPMS
- Check and adjust all four tyre pressures (cold) to the placard figures.
- Switch on and drive the car for about 10 minutes, keeping the speed above roughly 25 km/h (15 mph) for part of the drive.
- The system relearns the readings and the warning light goes out once it confirms all four pressures are correct.
There is nothing to press inside the car — correcting the pressures and driving is the whole procedure.
Light Won’t Go Out? Work Through This
- A tyre is genuinely low: the system is doing its job — find and fix the leak, re-inflate, then drive again.
- You didn’t drive long enough: the relearn needs about 10 minutes including time above 25 km/h.
- Light flashes then stays on (not a low tyre): a flashing TPMS light points to a sensor fault — often a flat sensor battery. The car may store a code you can look up on autodtcs.com.
Frequently Asked Questions
Is there a TPMS reset button in the Cee’d Mk2?
No — the system relearns automatically as you drive. Correct the pressures and drive for about 10 minutes and the light clears itself.
How far do I need to drive?
Around 10 minutes of normal driving including some time above 25 km/h.
Why does the light return after a few days?
Either a tyre is slowly losing air, or it was a little low when you reset. Re-check all four cold pressures.
The light flashes instead of staying steady — what does that mean?
A flashing TPMS light usually indicates a sensor fault rather than a low tyre — often a flat sensor battery. It will not clear by driving and needs the sensor checked.
After tyre or seasonal-wheel work it is worth confirming the service reminder is clear — see our Kia Cee’d service indicator reset guide.
Disclaimer: The information on this page is provided for general guidance only. Always follow your official service manual and safety precautions when working on your vehicle. We are not responsible for errors, omissions, or any damage resulting from the use of this information.
This website is an independent resource and is not affiliated with, endorsed by, or sponsored by Kia. All trademarks and brand names belong to their respective owners.