Service ResetService Reset
  • Home
  • Guides
  • Diagnostics
  • Tools
    • Tire Pressure Calculator
    • Request a Guide
    • Wheel Offset Calculator
    • Tire Size Comparison
    • Tire Pressure Converter
    • Torque Converter
    • Coolant & Antifreeze Mix
  • Blog
  • About
  • FAQ
  • Contact Us
  • Home
  • Guides
  • Diagnostics
  • Tools
    • Tire Pressure Calculator
    • Request a Guide
    • Wheel Offset Calculator
    • Tire Size Comparison
    • Tire Pressure Converter
    • Torque Converter
    • Coolant & Antifreeze Mix
  • Blog
  • About
  • FAQ
  • Contact Us
Home/RAM/1500/Mk5 (DT) 2019-present/Disconnect and Reconnect the Battery

Disconnect and Reconnect the Battery

Reviewed by the Service Reset editor · Updated September 27, 2026 · How we verify

These instructions apply to the RAM 1500 Mk5 (DT) 2019-present.
For other models, please choose your vehicle here.

The RAM 1500 (DT, 2019 onward) keeps its 12-volt battery under the hood. Disconnecting it — to replace it or before electrical work — follows the negative-first rule. eTorque mild-hybrid models add a separate 48-volt battery: that one is not owner-serviceable, so leave it alone.

  1. Apply the parking brake, shift to PARK, switch the ignition OFF, and take the key fob out of the cabin so the truck fully powers down.
  2. Open the hood and find the 12V battery under the hood. Identify the negative (−) and positive (+) posts — the positive post sits under a protective cap.
  3. Loosen the negative (−) terminal clamp nut and lift the negative cable off first. Tuck it aside so it cannot spring back onto the post.
  4. If you are removing the battery, lift the positive cap, loosen and remove the positive (+) cable, then undo the hold-down clamp at the base and lift the battery out.
  5. To reconnect, fit the positive (+) cable first, then the negative (−) cable last, and tighten both clamps snugly.

Frequently asked questions

Which terminal comes off first?

Negative (−) first when disconnecting, and negative last when reconnecting. Removing the earth first means a slipped spanner can’t short the live positive post to the body.

What resets when I reconnect?

The clock and radio presets clear, the power windows may need re-initialising (hold the switch fully up), and the oil-life and tyre-pressure systems resume. Re-set your presets and re-learn the windows after reconnecting.

My RAM is an eTorque — does it have two batteries?

Yes. The 12V battery under the hood is the one you service. The separate 48-volt hybrid battery is not owner-serviceable — do not disconnect or touch it; that is dealer/technician work.

If a warning light stays on after reconnecting, read the stored codes on autodtcs.com before assuming a component fault.

Independent guide — not affiliated with RAM. Always follow your official service manual and safety precautions. Read our full disclaimer.

Related Articles
  • Replace the Cabin Air Filter
  • Replace the Key Fob Battery
  • Reset the Oil Change Indicator

On This Page: [hide]

Frequently asked questions

Which terminal comes off first?

What resets when I reconnect?

My RAM is an eTorque — does it have two batteries?

Service Reset

Independent step-by-step car reset & maintenance guides – not affiliated with any manufacturer. All trademarks belong to their respective owners.

© 2026 ServiceReset.net. All rights reserved.

POPULAR BRANDS
Toyota · Volkswagen · BMW · Ford · Audi · Mercedes · Nissan · Kia
EXPLORE
  • Guides
  • Blog
  • About
  • Contact
TOOLS
  • Dashboard Warning Lights
  • Tire Pressure Calculator
  • Tools
  • FAQ
  • Request a Guide
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
  • YouTube
  • Pinterest