These instructions apply to the Suzuki Splash Mk1 (EX) 2008-2014.
For other models, please choose your vehicle here.
Replacing the wiper blades on the Suzuki Splash (2008-2014) is a quick no-tool job. Lift the arms off the glass first.
Front blades
- With the wipers parked and ignition off, lift the wiper arm away from the windshield.
- Press the release tab where the blade meets the arm’s hook and slide the blade off.
- Clip the new blade onto the hook until it locks.
- Lower the arm gently back onto the glass.
Rear blade
Lift the rear arm, unclip the old blade, fit the new one and lower the arm.
Replace blades that smear, chatter or leave streaks; clean the glass and wet the new rubber with washer fluid before use.
Frequently asked questions
What size blades? Fitments vary slightly – measure the old blades or check a fitment guide before buying.
Chasing a dashboard fault code instead? Look it up on autodtcs.com.
Independent guide — not affiliated with Suzuki. Always follow your official service manual and safety precautions. Read our full disclaimer.