These instructions apply to the Toyota Corolla Mk11 (E170) 2014-2019.
For other models, please choose your vehicle here.
The 2014–2019 Toyota Corolla (E170) clears its MAINT REQD light with the trip-meter button and the ignition — no tool, no menu. This is the US-market procedure.
- Switch the ignition off with Trip A showing (change the display to Trip A first).
- Press and hold the display-change (DISP) button, and while holding it turn the ignition to ON — do not start the engine, or the reset cancels.
- Keep holding until the display reads 000000. The MAINT REQD light is cleared.
FAQ
Why must the engine stay off?
Starting the engine cancels reset mode — the ignition has to be ON with the engine not running.
It has to show Trip A?
Yes — switch the meter to Trip A before you begin, not the odometer or Trip B.
What oil does it take?
0W-20 — about 4.4 qt with a filter on the 1.8L engine.
If your Corolla stores a fault code with the warning light, look it up on autodtcs.com.
Independent guide — not affiliated with Toyota. Always follow your official service manual and safety precautions. Read our full disclaimer.