These instructions apply to the Toyota Tacoma Mk3 (N300) 2016-2023.
For other models, please choose your vehicle here.
The 2016–2023 Toyota Tacoma (N300) shows its service reminder on the multi-information display, and you clear it from the display menu after an oil change — no trip-meter trick on this generation. This is the US-market procedure.
- With the ignition ON, use the < / > meter-control switches to bring up the multi-information display.
- Scroll with up/down to Settings and press the center button.
- Select Maintenance Reset and press.
- Select YES and press. The reminder is cleared.
FAQ
Is there a trip-meter method?
No — the N300 Tacoma uses the Settings → Maintenance Reset menu on the multi-information display, not the older hold-the-trip-button method.
When do I reset it?
Only after the service is done; the reminder is mileage-based.
Engine running or off?
The ignition only needs to be ON — you don’t have to start the engine to reach the menu.
What oil does it take?
0W-20 on both the 2.7L four (about 6.2 qt with a filter) and the 3.5L V6 (about 6.1–6.2 qt).
If your Tacoma stores a fault code with the warning light, look it up on autodtcs.com.
Independent guide — not affiliated with Toyota. Always follow your official service manual and safety precautions. Read our full disclaimer.