Service ResetService Reset
  • Home
  • Guides
  • Diagnostics
  • Tools
    • Tire Pressure Calculator
    • Request a Guide
    • Wheel Offset Calculator
    • Tire Size Comparison
    • Tire Pressure Converter
    • Torque Converter
    • Coolant & Antifreeze Mix
  • Blog
  • About
  • FAQ
  • Contact Us
  • Home
  • Guides
  • Diagnostics
  • Tools
    • Tire Pressure Calculator
    • Request a Guide
    • Wheel Offset Calculator
    • Tire Size Comparison
    • Tire Pressure Converter
    • Torque Converter
    • Coolant & Antifreeze Mix
  • Blog
  • About
  • FAQ
  • Contact Us
Home/Vauxhall/Insignia/Mk2 (Z18) 2017-2022/Reset the Tire Pressure Warning (TPMS)

Reset the Tire Pressure Warning (TPMS)

Reviewed by the Service Reset editor · Updated October 20, 2026 · How we verify

These instructions apply to the Vauxhall Insignia Mk2 (Z18) 2017-2022.
For other models, please choose your vehicle here.

The Vauxhall Insignia B monitors tire pressures and warns you with a dashboard light when one drops. After you adjust the pressures or change a wheel, the system needs to relearn — it does not show a live per-wheel pressure readout, so the fix is to set the correct cold pressures and let it re-reference them.

Reset the tire pressure warning

  1. Set every tire, including the spare if it has a sensor, to the correct cold pressure from the table below (check the door-pillar or fuel-flap placard for your exact car).
  2. Switch the ignition on.
  3. If your Driver Information Center has a tire-pressure page, open it and select the option to repeat or store the pressures.
  4. Drive the car for about 9 minutes at a steady speed above 25 mph (40 km/h).
  5. The warning light goes out once the system has relearned the new pressures.

Vauxhall Insignia tire pressures (2017–2022)

Normal / unladen cold pressures. Always defer to the placard on your own car, as pressures vary with load and wheel size.

Tire sizeFrontRear
215/55 R1732 psi (2.2 bar)29 psi (2.0 bar)
245/45 R1832 psi (2.2 bar)29 psi (2.0 bar)
235/45 R1833 psi (2.3 bar)33 psi (2.3 bar)
245/35 R2033 psi (2.3 bar)33 psi (2.3 bar)

For a heavy load, add roughly 3 psi (0.2 bar) to the rear as shown on the placard.

Why won’t the tire pressure light go out?

The light only clears once the pressures are correct and the car has been driven far enough to relearn. If one tire is still low — or a sensor battery has died on cars fitted with direct sensors — the warning stays on. Check all four pressures cold, including the spare.

Does the Insignia show individual tire pressures?

Most Insignia B models use a warning-based system rather than a live per-wheel pressure display, so you set the pressures by gauge and let the car relearn. A persistent warning after correctly inflating all tires should be checked for a faulty sensor.

Independent guide — not affiliated with Vauxhall. Always follow your official service manual and safety precautions. Read our full disclaimer.

Tire & wheel tools: Changing size, pressures or wheels? Use our free non-stock tire-pressure calculator, bar/PSI/kPa converter, tire size comparison and wheel offset & backspacing tools.
Related Articles
  • Vauxhall Insignia B Specifications
  • Reset the Infotainment System
  • Replace the Key Fob Battery
  • Jump-Start the Battery
  • Replace a Headlight Bulb
  • Replace the Cabin Filter

On This Page: [hide]

Reset the tire pressure warning

Vauxhall Insignia tire pressures (2017–2022)

Why won’t the tire pressure light go out?

Does the Insignia show individual tire pressures?

Service Reset

Independent step-by-step car reset & maintenance guides – not affiliated with any manufacturer. All trademarks belong to their respective owners.

© 2026 ServiceReset.net. All rights reserved.

POPULAR BRANDS
Toyota · Volkswagen · BMW · Ford · Audi · Mercedes · Nissan · Kia
EXPLORE
  • Guides
  • Blog
  • About
  • Contact
TOOLS
  • Dashboard Warning Lights
  • Tire Pressure Calculator
  • Tools
  • FAQ
  • Request a Guide
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
  • YouTube
  • Pinterest