These instructions apply to the Audi Q5 Mk2 (FY/80A) 2017-Present.
For other models, please choose your vehicle here.
To change the wiper blades on the Audi Q5 (FY/80A, 2017–present) you first move the wipers to their upright service position. They won’t lift far enough with the ignition off, so use the simple ignition-and-stalk sequence below.
How to Set the Q5 (FY) Wipers to Service Position
- Make sure the hood (bonnet) is closed — the wipers won’t enter service position with it open.
- Turn the ignition on, then off.
- Within about 10 seconds, flick the wiper stalk down (the single wipe/flick position).
- The wipers rise to the vertical service position, clear of the windshield.
- Change the blades, then turn the ignition on and operate the wipers to return them to park.
In Cold Weather
- Check the blades aren’t frozen to the glass before moving them, or you can damage the wiper motor or linkage.
- Lift the blades off the glass gently once they’re upright if there’s any ice.
Frequently Asked Questions
My Q5 wipers won’t lift for a blade change — why?
They only rise fully in service position. Turn the ignition on then off and flick the wiper stalk within 10 seconds; the bonnet must be closed.
How do I put them back?
Turn the ignition on and run the wipers once — they return to the normal parked position automatically.
If a wiper fault light appears, look it up on autodtcs.com.
Independent guide — not affiliated with Audi. Always follow your official service manual and safety precautions. Read our full disclaimer.