These instructions apply to the Vauxhall Insignia Mk2 (Z18) 2017-2022.
For other models, please choose your vehicle here.
Halogen-equipped Vauxhall Insignia B models let you change a headlight bulb from inside the engine bay. Cars with the IntelliLux LED matrix headlamps are sealed units and are not an owner job.
Change a headlight bulb (halogen)
- Switch the lights and ignition off and open the hood.
- Twist off the round cover at the rear of the headlamp for the bulb you need.
- Unclip the holder or spring clip and withdraw the bulb.
- Fit the new bulb, holding it by the base only to keep oil off the glass.
- Refit the holder and cover and test the light.
Insignia B bulb types (halogen trim)
- Low (dipped) beam: H7
- High (main) beam: H7
- Front turn signal: PY21W (amber, 581)
- Front fog light: check the fitted bulb (commonly H8 or H11) before buying
Can I change the LED matrix headlights myself?
No. On IntelliLux LED and matrix-LED trims the light source is built into the headlamp and cannot be replaced individually — a faulty unit is repaired by a workshop. Only halogen-headlamp cars have owner-replaceable bulbs.
Do I need to code a new bulb?
A like-for-like halogen bulb needs no coding. Only full headlamp assemblies or LED modules involve workshop setup.
Independent guide — not affiliated with Vauxhall. Always follow your official service manual and safety precautions. Read our full disclaimer.