These instructions apply to the Skoda Superb Mk3 (3V) 2015-Present.
For other models, please choose your vehicle here.
If the one-touch (auto up/down) windows on your Skoda Superb Mk3 (3V, 2015–present) have stopped working — or now only move while you hold the switch, usually after a battery disconnection or a flat battery — each window needs re-initialising so it relearns its closed position. It’s a quick no-tools job. This guide shows how.
Why One-Touch Stops Working
Each window motor stores its top (closed) position so the auto function and the anti-trap (pinch protection) know where the glass stops. Cutting power clears that memory, so the window only inches while you hold the switch. Re-initialising restores normal operation.
How to Re-initialise the Superb Mk3 Windows
- Turn the ignition on.
- Work on one window at a time from its own switch.
- Pull the close switch up and hold until the window is fully closed, then release.
- Pull the close switch again and hold for about 1 second with the window already closed.
- Release the switch and test the one-touch function — a single tap up or down should now run the window automatically. Repeat for each window that lost the feature.
If It Still Won’t Auto-Close
- Repeat the procedure — the brief hold after the glass reaches the top is what registers the limit.
- Make sure the glass reaches the very top — grit or ice in the runner can stop it short.
- After a battery disconnection this is the step Skoda lists to restore the windows, so run it alongside any battery work.
Frequently Asked Questions
Why did my Superb windows lose auto after the battery was off?
Disconnecting power wipes the stored closed position, so auto and anti-trap switch off until you re-teach each window.
The window only moves while I hold the switch — same fault?
Yes — that’s the “normalisation lost” state. The close-and-hold routine re-teaches it and one-touch returns.
The window bounces back down when closing — why?
That’s the anti-trap protection reacting because the limit isn’t learned. Complete the routine and it clears.
Do I need any tools?
No — just the door switches with the ignition on.
To clear a service reminder after maintenance, see our Superb service reset guide. For warning lights, look up the code on autodtcs.com.
Independent guide — not affiliated with Skoda. Always follow your official service manual and safety precautions. Read our full disclaimer.