These instructions apply to the Chevrolet Equinox Mk3 2018-2024.
For other models, please choose your vehicle here.
The 2018–2024 Chevrolet Equinox has a direct TPMS with a sensor in each wheel. After a rotation you relearn the sensor positions with a GM relearn tool. This is the US-market procedure.
- Set all four to the placard pressure, apply the parking brake, and put the vehicle in Service Mode (ignition on, engine off).
- Scroll the DIC to the Tire Pressure screen and press and hold ✓ — the horn sounds twice and TIRE LEARNING ACTIVE shows, starting at the driver-front.
- Trigger the relearn tool at each valve stem in order: driver-front, passenger-front, passenger-rear, driver-rear (one chirp each).
- A double-beep after the driver-rear ends it. Switch off; set all tires to the placard pressure.
Two minutes for the first wheel, five overall, or restart.
Chevrolet Equinox tire pressures
Cold pressures and tire sizes are on the Tire and Loading Information label on the driver-side center (B) pillar — that placard is the authority. The compact spare takes 60 psi.
FAQ
Can I use the key-fob method?
No — this generation uses a relearn tool in sensor-matching mode, not a fob relearn.
What order?
Driver-front, passenger-front, passenger-rear, driver-rear.
Light won’t clear.
Re-check cold pressures and repeat; a dead sensor battery needs replacing.
If your Equinox stores a fault code with the warning light, look it up on autodtcs.com.
Independent guide — not affiliated with Chevrolet. Always follow your official service manual and safety precautions. Read our full disclaimer.