Service ResetService Reset
  • Home
  • Guides
  • Tools
    • Tire Pressure Calculator
    • Check DTC Codes
    • Request a Guide
  • Blog
  • About
  • FAQ
  • Contact Us
  • Home
  • Guides
  • Tools
    • Tire Pressure Calculator
    • Check DTC Codes
    • Request a Guide
  • Blog
  • About
  • FAQ
  • Contact Us
Home/Vauxhall/Vivaro/Mk2 (B) 2014-2019/Reset the Service Indicator

Reset the Service Indicator

Reviewed by the Service Reset editor · Updated September 25, 2026 · How we verify

These instructions apply to the Vauxhall Vivaro Mk2 (B) 2014-2019.
For other models, please choose your vehicle here.

The Vauxhall Vivaro (2014–2019) is one of the UK’s most common work vans, and like every the Renault Trafic-based Vivaro B it uses a dashboard service reminder — a distance-to-service countdown you clear yourself after an oil and filter change. No tool, just the ignition on and two buttons.

The Vivaro B (2014–2019) is the second-generation Vauxhall/Opel Vivaro and the last one based on the Renault Trafic — long one of the UK’s best-selling medium vans. The 2019-on Vivaro C is a different, PSA-based van.

Do the Service First

Only zero the reminder once the work is done — the counter is there to flag when the oil is actually due.

Reset the Vivaro Service Indicator

  1. Switch the ignition on without starting the engine.
  2. Use the trip-computer scroll button to step through the readouts to ‘Mileage before service’.
  3. Press and hold the reset button — after about 5 seconds the remaining distance to service appears.
  4. Keep holding for a further 10 seconds until the figure jumps back to the full interval.
  5. Switch the ignition off, then on again to check the spanner has cleared.

If It Won’t Reset

The two things that catch people out are selecting the wrong readout and not holding long enough. Make sure ‘Mileage before service’ is on the display before you hold, and keep the button pressed for the full time. A spanner that stays on after a clean reset usually means a separate time-based service item is due.

Frequently Asked Questions

Is the Vivaro B the same as the newer Vivaro?

No. The Vivaro B (2014–2019) shares the Renault Trafic platform, so these guides apply to it and its NV300 and Talento siblings. The 2019-on Vivaro C moved to the PSA/Stellantis platform and is a different van with different procedures.

How do you reset the service light on a Vauxhall Vivaro?

Ignition on (engine off), scroll to ‘Mileage before service’, then press and hold the reset button — about 5 seconds to show the distance, then 10 more to zero it.

Do I need a diagnostic tool?

No — it resets from the dashboard buttons. Only reset after the oil has actually been changed.

Is the Vauxhall Vivaro the same as a Renault Trafic?

Mechanically yes — it’s the Renault Trafic-based Vivaro B and shares its instrument panel, so the reset is identical across the Renault Trafic, Fiat Talento and Nissan NV300.

If a warning light or fault code appeared, look it up on autodtcs.com.

Independent guide — not affiliated with Vauxhall. Always follow your official service manual and safety precautions. Read our full disclaimer.

Related Articles
  • Open the Bonnet
  • Reinitialise the Electric Windows
  • Reset the Tyre Pressure Warning
  • Turn the Stop-Start System On or Off
  • Disconnect and Reconnect the Battery
  • Jump-Start a Flat Battery

Service Reset

Step-by-step reset and maintenance guides for all major car brands. Independent resource – not affiliated with any car manufacturer. All trademarks and logos are the property of their respective owners and are used for identification purposes only.

© 2026 ServiceReset.net. All rights reserved.

POPULAR BRANDS
Toyota · Volkswagen · BMW · Ford · Audi · Mercedes · Nissan · Peugeot · Vauxhall · Kia
NAVIGATION
  • Home
  • Guides
  • Dashboard Warning Lights
  • Tools
  • Tire Pressure Calculator
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
SOCIAL
  • YouTube
  • Pinterest