Service ResetService Reset
  • Home
  • Guides
  • Diagnostics
  • Tools
    • Tire Pressure Calculator
    • Request a Guide
    • Wheel Offset Calculator
    • Tire Size Comparison
    • Tire Pressure Converter
    • Torque Converter
    • Coolant & Antifreeze Mix
  • Blog
  • About
  • FAQ
  • Contact Us
  • Home
  • Guides
  • Diagnostics
  • Tools
    • Tire Pressure Calculator
    • Request a Guide
    • Wheel Offset Calculator
    • Tire Size Comparison
    • Tire Pressure Converter
    • Torque Converter
    • Coolant & Antifreeze Mix
  • Blog
  • About
  • FAQ
  • Contact Us
Home/Peugeot/Traveller/Mk1 (K0) 2016-present/Initialize the Power Windows

Initialize the Power Windows

Reviewed by the Service Reset editor · Updated October 20, 2026 · How we verify

These instructions apply to the Peugeot Traveller Mk1 (K0) 2016-present.
For other models, please choose your vehicle here.

After the 12V battery is disconnected or a fuse is pulled, the one-touch (automatic) function on the Peugeot Traveller’s windows can stop working until they are re-initialized. It takes a few seconds per window.

How to re-initialize a power window

  1. Fully open the window: hold the switch down until the glass is all the way down, then release.
  2. Fully close the window: hold the switch up until the glass is fully closed.
  3. Hold the switch up again until the glass is fully closed, keep holding for a further second, then release.
  4. Test the one-touch function. Repeat for any other one-touch windows.

To re-initialize the electric sliding door at the same time, close it manually, then open and close it once with the switch.

Frequently asked questions

Why did my Traveller lose one-touch windows?

Disconnecting the battery, a flat battery, or pulling a fuse clears the window control module’s end-stop memory, so it reverts to hold-to-move until re-initialized.

Is the anti-pinch still active?

Re-initializing restores the anti-pinch (bounce-back) protection along with the one-touch function, so it is important to complete the procedure after any power loss.

Independent guide — not affiliated with Peugeot. Always follow your official service manual and safety precautions. Read our full disclaimer.

Related Articles
  • Peugeot Traveller Specifications (2016-present)
  • Reset the Tire Pressure System (TPMS)
  • Replace the Key Fob Battery
  • Disconnect and Reconnect the Battery
  • Turn Stop-Start On or Off
  • Reset the Service Indicator

On This Page: [hide]

How to re-initialize a power window

Frequently asked questions

Why did my Traveller lose one-touch windows?

Is the anti-pinch still active?

Service Reset

Independent step-by-step car reset & maintenance guides – not affiliated with any manufacturer. All trademarks belong to their respective owners.

© 2026 ServiceReset.net. All rights reserved.

POPULAR BRANDS
Toyota · Volkswagen · BMW · Ford · Audi · Mercedes · Nissan · Kia
EXPLORE
  • Guides
  • Blog
  • About
  • Contact
TOOLS
  • Dashboard Warning Lights
  • Tire Pressure Calculator
  • Tools
  • FAQ
  • Request a Guide
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
  • YouTube
  • Pinterest