These instructions apply to the Peugeot Traveller Mk1 (K0) 2016-present.
For other models, please choose your vehicle here.
The Peugeot Traveller’s Stop & Start system switches the engine off when you come to a standstill to save fuel. You can turn it off from the dashboard button or the vehicle menu, and it switches back on each time you restart.
How to turn Stop & Start off
- With the engine running, find the Stop & Start button — marked with an “A” looped by an arrow (often “ECO OFF”) on the dashboard or center console.
- Press it once. A warning light comes on and the display confirms the system is switched off.
- Alternatively, open the multifunction display, select Driving functions, then Start/Stop, and switch it off there.
The setting is not permanent — Stop & Start returns to on the next time you start the van. Repeat the step above each drive if you prefer it off.
Frequently asked questions
Why won’t my Traveller’s engine stop at junctions?
Stop & Start only acts when conditions are met: engine warm, battery well charged, cabin temperature reached, and the van fully stationary. In cold weather or with a tired battery it may stay running.
How do I turn Stop & Start back on?
Press the “A” button again, or re-enable it in the Driving functions menu. It is on by default at every restart anyway.
Does unbuckling the seatbelt affect it?
Yes — opening the driver’s door or releasing the driver’s seatbelt cancels an automatic engine stop as a safety measure.
Independent guide — not affiliated with Peugeot. Always follow your official service manual and safety precautions. Read our full disclaimer.