Service ResetService Reset
  • Home
  • Guides
  • Diagnostics
  • Tools
    • Tire Pressure Calculator
    • Request a Guide
    • Wheel Offset Calculator
    • Tire Size Comparison
    • Tire Pressure Converter
    • Torque Converter
    • Coolant & Antifreeze Mix
  • Blog
  • About
  • FAQ
  • Contact Us
  • Home
  • Guides
  • Diagnostics
  • Tools
    • Tire Pressure Calculator
    • Request a Guide
    • Wheel Offset Calculator
    • Tire Size Comparison
    • Tire Pressure Converter
    • Torque Converter
    • Coolant & Antifreeze Mix
  • Blog
  • About
  • FAQ
  • Contact Us
Home/Peugeot/Traveller/Mk1 (K0) 2016-present/Reset the Tire Pressure System (TPMS)

Reset the Tire Pressure System (TPMS)

Reviewed by the Service Reset editor · Updated October 20, 2026 · How we verify

These instructions apply to the Peugeot Traveller Mk1 (K0) 2016-present.
For other models, please choose your vehicle here.

The Peugeot Traveller uses an indirect tire-pressure system that watches each wheel’s rolling speed, so there is no per-wheel PSI display. After you adjust the pressures or change a wheel, you must re-initialize it so it learns the new correct pressures as the reference.

How to reset (re-initialize) the TPMS

  1. Set all tires to the correct cold pressures for your load — read the label on the driver’s door pillar or inside the fuel flap.
  2. Switch the ignition on.
  3. Touchscreen vans: open Driving assistance, select Under-inflation initialisation, then YES. A beep and a confirmation message follow.
  4. Audio-system vans: open Personalisation–configuration and select Under-inflation initialisation.
  5. Vans without an audio system: press and hold the TPMS button for about 3 seconds until it beeps.
  6. Drive normally so the system can learn the new reference pressures.

Because the system is indirect, it only warns of a pressure loss relative to the stored reference — always reset it straight after inflating or swapping tires, or it may warn incorrectly.

Frequently asked questions

Why doesn’t my Traveller show individual tire pressures?

It has an indirect system (no pressure sensors in the wheels), so it monitors wheel speed instead of reading actual PSI. That is normal — it shows a warning, not live numbers.

When do I need to reset it?

After adjusting the pressures, rotating or replacing tires, or fitting the spare — anything that changes the “normal” rolling behavior.

The warning won’t clear — what now?

Re-check and correct all four cold pressures (and the spare), then re-run the initialization. A warning that returns while pressures are correct can indicate a slow leak or a damaged tire.

Independent guide — not affiliated with Peugeot. Always follow your official service manual and safety precautions. Read our full disclaimer.

Tire & wheel tools: Changing size, pressures or wheels? Use our free non-stock tire-pressure calculator, bar/PSI/kPa converter, tire size comparison and wheel offset & backspacing tools.
Related Articles
  • Peugeot Traveller Specifications (2016-present)
  • Initialize the Power Windows
  • Replace the Key Fob Battery
  • Disconnect and Reconnect the Battery
  • Turn Stop-Start On or Off
  • Reset the Service Indicator

On This Page: [hide]

How to reset (re-initialize) the TPMS

Frequently asked questions

Why doesn’t my Traveller show individual tire pressures?

When do I need to reset it?

The warning won’t clear — what now?

Service Reset

Independent step-by-step car reset & maintenance guides – not affiliated with any manufacturer. All trademarks belong to their respective owners.

© 2026 ServiceReset.net. All rights reserved.

POPULAR BRANDS
Toyota · Volkswagen · BMW · Ford · Audi · Mercedes · Nissan · Kia
EXPLORE
  • Guides
  • Blog
  • About
  • Contact
TOOLS
  • Dashboard Warning Lights
  • Tire Pressure Calculator
  • Tools
  • FAQ
  • Request a Guide
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
  • YouTube
  • Pinterest