Service ResetService Reset
  • Home
  • Guides
  • Diagnostics
  • Tools
    • Tire Pressure Calculator
    • Request a Guide
    • Wheel Offset Calculator
    • Tire Size Comparison
    • Tire Pressure Converter
    • Torque Converter
    • Coolant & Antifreeze Mix
  • Blog
  • About
  • FAQ
  • Contact Us
  • Home
  • Guides
  • Diagnostics
  • Tools
    • Tire Pressure Calculator
    • Request a Guide
    • Wheel Offset Calculator
    • Tire Size Comparison
    • Tire Pressure Converter
    • Torque Converter
    • Coolant & Antifreeze Mix
  • Blog
  • About
  • FAQ
  • Contact Us
Home/Peugeot/Traveller/Mk1 (K0) 2016-present/Replace the Key Fob Battery

Replace the Key Fob Battery

Reviewed by the Service Reset editor · Updated October 20, 2026 · How we verify

These instructions apply to the Peugeot Traveller Mk1 (K0) 2016-present.
For other models, please choose your vehicle here.

A weak key fob battery is the usual reason for poor remote range or a fob that only works up close on the Peugeot Traveller. It is a quick DIY swap with a coin cell.

How to change the key fob battery

  1. Slide out the emergency key blade, or ease the fob cover open at the seam with a small flat screwdriver.
  2. Split the two halves of the fob.
  3. Lift out the old coin cell, noting which way up it sits.
  4. Fit the new cell the same way up — CR2032 for the standard folding key, or CR1620 for the other remote type. Observe the correct polarity.
  5. Clip the fob back together and test the buttons.

Frequently asked questions

Which battery does the Traveller key fob use?

A CR2032 in the standard folding remote, or a CR1620 in the alternative remote type. Check the old cell for the number printed on it.

Do I need to reprogram the key after changing the battery?

No. Replacing the cell does not erase the remote — it keeps working once the fresh battery is fitted.

The range is still poor with a new battery — why?

Confirm the polarity and that the cell is seated, and try a known-good brand. Persistent short range can point to a worn fob button pad or receiver issue rather than the battery.

Independent guide — not affiliated with Peugeot. Always follow your official service manual and safety precautions. Read our full disclaimer.

Related Articles
  • Peugeot Traveller Specifications (2016-present)
  • Initialize the Power Windows
  • Reset the Tire Pressure System (TPMS)
  • Disconnect and Reconnect the Battery
  • Turn Stop-Start On or Off
  • Reset the Service Indicator

On This Page: [hide]

How to change the key fob battery

Frequently asked questions

Which battery does the Traveller key fob use?

Do I need to reprogram the key after changing the battery?

The range is still poor with a new battery — why?

Service Reset

Independent step-by-step car reset & maintenance guides – not affiliated with any manufacturer. All trademarks belong to their respective owners.

© 2026 ServiceReset.net. All rights reserved.

POPULAR BRANDS
Toyota · Volkswagen · BMW · Ford · Audi · Mercedes · Nissan · Kia
EXPLORE
  • Guides
  • Blog
  • About
  • Contact
TOOLS
  • Dashboard Warning Lights
  • Tire Pressure Calculator
  • Tools
  • FAQ
  • Request a Guide
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
  • YouTube
  • Pinterest