These instructions apply to the Peugeot Traveller Mk1 (K0) 2016-present.
For other models, please choose your vehicle here.
After an oil or inspection service, the spanner “maintenance” indicator on your Peugeot Traveller has to be reset to zero. On this PSA van it is an owner job that uses the trip-reset button and the ignition — no diagnostic tool is needed.
How to reset the service indicator
- Switch the ignition off.
- Press and hold the trip-reset button on the instrument panel (the small button used to zero the trip meter).
- Switch the ignition on — do not start the engine. The spanner symbol appears and a countdown begins on the display.
- Keep the button held until the countdown reaches “0”.
- Release the button. The spanner symbol disappears and the service indicator is reset.
Shorter method: with the ignition already on, press and hold the trip-reset button until “0” shows on the display, then release. Either method works on the diesel and the electric e-Traveller.
Frequently asked questions
Do I need a diagnostic tool to reset the Traveller service light?
No. The Peugeot Traveller uses the owner trip-button method above, so a dealer scan tool is not required for the standard service reminder.
Where is the trip-reset button?
It is the small button or stalk end on the instrument cluster that you normally press to switch or zero the trip meter.
The spanner is still showing after I reset it — why?
Repeat the procedure starting with the ignition fully off (Method 1). If a wrench or oil-service warning keeps returning, the service counter may not have reached “0” before you released the button, or there is a genuine fault to check.
Does the same reset work on the e-Traveller?
Yes. The electric e-Traveller uses the same display countdown reset for its servicing reminder.
Independent guide — not affiliated with Peugeot. Always follow your official service manual and safety precautions. Read our full disclaimer.