These instructions apply to the Chevrolet Orlando (J309) 2011-2018. For other models, please choose your vehicle here.
Last updated:
After an oil change on your Chevrolet Orlando (J309, 2011–2018), the Oil Life / service indicator needs resetting so the countdown starts again. You can do it yourself — there are a few methods depending on your dashboard.
Before You Start
- Only reset after the oil has actually been changed.
Method 1 — Accelerator Pedal
- Remove the key and wait 2 minutes.
- Turn the ignition on but do not start the engine.
- Within 1 minute, press and release the accelerator pedal 3 times.
Method 2 — Display Menu
- Ignition on. Open the ‘Vehicle Information’ menu and scroll to ‘Oil Life’.
- Hold the brake pedal and press and hold ‘SET/CLR’ for about 3 seconds, then release.
If the Reset Doesn’t Take
- Don’t start the engine during the pedal method — ignition on only.
- Mind the timing — three pedal presses within a minute.
- A service light that won’t clear can store a code — look it up on autodtcs.com.
Frequently Asked Questions
How do I reset the oil life light on a Chevrolet Orlando?
Ignition on (engine off), then press the accelerator 3 times within a minute — or use the Oil Life menu method.
Do I need a tool?
No — both methods are done from the driver’s seat.
Which method should I use?
The pedal method works on any Orlando; the menu method depends on your display.
Should I reset before or after the oil change?
After — the indicator monitors oil life.
If a service-related warning stays on, decode the code on autodtcs.com.
Disclaimer: The information on this page is provided for general guidance only. Always follow your official service manual and safety precautions when working on your vehicle. We are not responsible for errors, omissions, or any damage resulting from the use of this information.
This website is an independent resource and is not affiliated with, endorsed by, or sponsored by Chevrolet. All trademarks and brand names belong to their respective owners.