• Home
  • Guides
  • Tire Pressure Calculator
  • Check DTC Codes
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact Us
  • Tools
  • Home
  • Guides
  • Tire Pressure Calculator
  • Check DTC Codes
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact Us
  • Tools
Home/Citroën/Berlingo/Mk2 (B9) 2008-2018/Re-initialise the Electric Windows

Re-initialise the Electric Windows

These instructions apply to the Citroën Berlingo Mk2 (B9) 2008-2018. For other models, please choose your vehicle here.

Last updated: June 5, 2026

If the one-touch (auto up/down) function on your Citroën Berlingo Mk2 (B9, 2008–2018) has stopped working — usually after a battery disconnection or a flat battery — the window needs re-initialising so it relearns its end positions. It is a 30-second job per window with no tools. This guide shows how.

Why One-Touch Stops Working

The window motor remembers its fully-open and fully-closed positions so the auto and anti-trap (pinch protection) functions work. Cutting power clears that memory, so the window only moves while you hold the switch. Re-initialising restores it.

How to Re-initialise a Berlingo Window

  1. Close the driver’s door.
  2. Press and hold the window open switch until the window is fully open, then release.
  3. Pull and hold the window close switch until the window is fully closed, then keep holding for 1 more second.
  4. Release the switch — the procedure is complete.
  5. Repeat for the passenger’s window using that door’s switch.

If It Still Won’t Auto-Close

  • Repeat the procedure — the hold at full close is what registers the limit.
  • Make sure the glass reaches the very top and bottom — grit in the runner can stop it short.

Frequently Asked Questions

Why did my Berlingo windows lose auto after the battery was off?

Disconnecting power wipes the stored end positions, so auto and anti-trap switch off until you re-teach each window.

The window goes up a bit then stops — why?

That’s the anti-trap protection reacting because the limits aren’t learned. Complete the open-then-close-and-hold routine and it clears.

Do I need any tools?

No — just the door switches and the ignition on.

If you have just done battery work, run this alongside the other resets — see our Berlingo battery disconnect/reconnect guide. For warning lights, look up the code on autodtcs.com.

Disclaimer: The information on this page is provided for general guidance only. Always follow your official service manual and safety precautions when working on your vehicle. We are not responsible for errors, omissions, or any damage resulting from the use of this information.

This website is an independent resource and is not affiliated with, endorsed by, or sponsored by Citroën. All trademarks and brand names belong to their respective owners.

Was this helpful?

Yes  No
Related Articles
  • Start the Car With a Dead Key Fob Battery
  • Reset a Frozen Infotainment Screen
  • Replace the Key Fob Battery
  • Turn the Stop-Start System On or Off
  • Disconnect and Reconnect the Battery
  • Reset the Service Indicator

Didn't find your answer? Contact Us

Mk2 (B9) 2008-2018
  • Re-initialise the Electric Windows
  • Reset the Service Indicator
  • Disconnect and Reconnect the Battery
  • Turn the Stop-Start System On or Off
  • Replace the Key Fob Battery
  • Reset a Frozen Infotainment Screen
  • Start the Car With a Dead Key Fob Battery

Service Reset

Step-by-step reset and maintenance guides for all major car brands. Independent resource – not affiliated with any car manufacturer. All trademarks and logos are the property of their respective owners and are used for identification purposes only.

© 2026 ServiceReset.net. All rights reserved.

POPULAR BRANDS
Toyota · Volkswagen · BMW · Ford · Audi · Mercedes · Nissan · Peugeot · Vauxhall · Kia
NAVIGATION
  • Home
  • Guides
  • Tools
  • Tire Pressure Calculator
  • Blog
  • About
  • FAQ
  • Request a Guide
  • Contact
LEGAL
  • Privacy Policy
  • Terms of Use
  • Disclaimer
SOCIAL
  • YouTube