These instructions apply to the Dacia Sandero Mk3 (DJF) 2021-Present.
For other models, please choose your vehicle here.
The Dacia Sandero (Mk3 / DJF, 2021–present) stores its tire pressures as the reference, so you reset the tire-pressure warning from the instrument-cluster menu after inflating the tires or changing a wheel, then drive a short distance to finish.
How to Reset the Tire Pressure Warning on a Dacia Sandero (Mk3)
- With the vehicle stopped, set all four tires to the correct cold pressures (label on the driver’s door pillar or fuel flap).
- Switch the ignition on.
- Press the scroll button (1) until you reach ‘Vehicle’, then confirm with button (2)/(3) (or the steering-wheel OK button).
- Select ‘Tyre pressure’ and press and hold OK — a confirmation message appears.
- Drive the vehicle to complete the relearn.
When You Need to Reset
- After checking or adjusting tire pressures.
- After changing one or more wheels or tires, including winter wheels.
- After swapping the front and rear wheels.
Frequently Asked Questions
Why is the tire pressure light still on after resetting?
The system stores whatever pressures are set when you confirm, and needs a short drive to finish. Inflate every tire correctly first, then reset and drive.
Where’s the OK button?
On the Mk3 it’s on the steering-wheel stalk/controls; use it to confirm the cluster menu selections. Some trims use the small buttons on the instrument panel instead.
For a tire-pressure warning that keeps returning with a code, check it on autodtcs.com.
Independent guide — not affiliated with Dacia. Always follow your official service manual and safety precautions. Read our full disclaimer.