These instructions apply to the Peugeot Traveller Mk1 (K0) 2016-present.
For other models, please choose your vehicle here.
After the 12V battery is disconnected or a fuse is pulled, the one-touch (automatic) function on the Peugeot Traveller’s windows can stop working until they are re-initialized. It takes a few seconds per window.
How to re-initialize a power window
- Fully open the window: hold the switch down until the glass is all the way down, then release.
- Fully close the window: hold the switch up until the glass is fully closed.
- Hold the switch up again until the glass is fully closed, keep holding for a further second, then release.
- Test the one-touch function. Repeat for any other one-touch windows.
To re-initialize the electric sliding door at the same time, close it manually, then open and close it once with the switch.
Frequently asked questions
Why did my Traveller lose one-touch windows?
Disconnecting the battery, a flat battery, or pulling a fuse clears the window control module’s end-stop memory, so it reverts to hold-to-move until re-initialized.
Is the anti-pinch still active?
Re-initializing restores the anti-pinch (bounce-back) protection along with the one-touch function, so it is important to complete the procedure after any power loss.
Independent guide — not affiliated with Peugeot. Always follow your official service manual and safety precautions. Read our full disclaimer.