These instructions apply to the Suzuki Alto Mk7 (GF) 2009-2014.
For other models, please choose your vehicle here.
Replacing the wiper blades on the Suzuki Alto (2009-2014) is a quick no-tool job. Lift the arms off the glass first.
Front blades
- With the wipers parked and ignition off, lift the wiper arm away from the windshield.
- Press the release tab where the blade meets the arm’s hook and slide the blade off.
- Clip the new blade onto the hook until it locks.
- Lower the arm gently back onto the glass.
Rear blade
If your Alto has a rear wiper, lift the arm, unclip the old blade, fit the new one and lower the arm.
Replace blades that smear, chatter or leave streaks; clean the glass and wet the new rubber with washer fluid before use.
Frequently asked questions
What size blades? Fitments vary slightly – measure the old blades or check a fitment guide before buying.
Chasing a dashboard fault code instead? Look it up on autodtcs.com.
Independent guide — not affiliated with Suzuki. Always follow your official service manual and safety precautions. Read our full disclaimer.